Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 1 YEAR MANUFACTURER

Package Includes:

• (1) Audio Technica AT2050 Side-Address Studio Condenser Recording Microphone Mic
• (1) Rockville DMS40 40" Microphone Boom Arm Studio Podcast USB Mic Stand+Desk Clamp
• (1) Rockville ROCKSHIELD 3 Large Studio Mic Isolation Shield with Sound Dampening Foam

---

Authorized Audio Technica Dealer!

Description of AT2050:

The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more.

Features:

• Audio Technica AT2050 Side-Address Multi-Pattern Condenser Studio/Recording Microphone
• Element: Externally-polarized (DC bias) condenser
• Polar Patterns: Cardioid, Omni-Directional, Figure-Eight
• Frequency Response: 20 Hz - 20 kHz
• Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
• Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
• Impedance: 120 Ohms
• Maximum Input Sound Level:
  • 149 dB SPL, 1 kHz at 1% T.H.D.;
  • 159 dB SPL, with 10 dB pad (nominal)
• Noise: 17 dB SPL
• Dynamic Range (Typical): 132 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 77 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 4.7 mA typical
• Switches: Polar selection; Flat, roll-off; 10 dB pad (nominal)
• Three Switchable Polar Patterns: Omni, Cardioid, Figure-Eight
• Switchable 80 Hz High-Pass Filter and 10 dB pad
• Large diaphragm for smooth, natural sound and low noise
• State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards
• Includes: Shock Mount & Protective Pouch
• Product Weight: 0.91 Lbs.
• Product Dimensions: 6.69" inches Long,  2.05" inches Maximum Body Diameter

---

How to Set Up DMS40:

Video of DMS40:

The Rockville DMS40 desktop microphone boom arm is the perfect accessory for any podcast, home studio setup, or broadcasting studio. Its rotating design provides a maximum arm reach of 40" giving you freedom to place your mic anywhere you want!

Our designers used the most sturdy and long lasting clamps and springs, with durable steel construction.

Features:

• Rockville DMS40 40" Studio Desk Clamp Microphone Stand w/Boom Arm 
  
• Articulating microphone boom arm
  
• Suitable for studios, broadcasting, podcasting, and more
  
• Arms: 20"+20" arm length for adjustment
  
• C-shape desk clamp is made of aluminum alloy 
  
• Fits any desk less than 2 inch thick
  
• ABS plastic mic clip
  
• You can set the base of the stand on the desk firmly and adjust to your favorite position
  
• High quality steel frame is sturdy and durable
  
• Internal springs for silent and effortless positioning

---

How to Set Up Your RockShield 3:

Video of ROCKSHIELD 3:

Includes:

• 5 Panel Mic Isolation Shield
• Hardware to Mount unit to your mic stand
• 5/8” Mic Adapter
• Desktop mic attachment

RockShield 3
Rockville’s Rockshield 3 studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 2-inch-thick high density acoustic foam, the RockShield 3 keeps unwanted outside audio waves and vibrations from affecting your recordings. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, meanwhile room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a countertop/tabletop. Easy installation and studio quality performance will quickly make the Rockshield 3 your go-to sound dampening isolation shield.

Features:

• RockShield 3 Pro Audio Acoustic Microphone Isolation Shield
• Keeps Excessive Room Ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
• Isolates Directional Microphones from Off Axis Coloration
• Limits External Bleed from Unintended Sound Sources
• Features a 2-Inch-Thick High Density Pyramid Acoustic Foam front and a vented metal back plate for the Best Noise Reflection Reduction
• Can be used in fixed location
• Stand mountable
• Provides Vocal Booth Style Recordings with Minimal Footprint
• Professional Studio-Grade
• Rugged Finish Makes This Easy to Transport
• Tri-Pod Foot Design for Stability on Flat Surfaces
• 3/8 Die-Cast Metal Threads 
• Mic Stand with 5/8 Adapter
• The shield is made of pure high-grade steel
• Number of Panels: 5 pcs
• Dimensions Each Panel: 6.3'' x 12.2'' inch
• Dimensions Assembled Unit: 17.5'' x 16.1'' x 7'' inch

AudioSavings Return Policy:

At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.

Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.

Replacement/Processing Time:

Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items

Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.