Solar Panel Battery Regulator Charge Controller 30A PWM LCD Quality 12V/24V
Specification
  • Load: Light Control
  • Charging Mode:MPPT
  • Model: RBL-60A
  • System Voltage: 12V 24V
  • Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery)
  • Max input power: 750W(12V system); 1500W(24V system)
  • Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood)
  • Float charge: 13.7V(defaul,adjustable),12.0-15.0V
  • Discharge stop voltage: 10.7V(defaul,adjustable),9.0-11.5V
  • Discharge reconnect voltage:12.5V(defaul,adjustable),11.0-13.0V
  • Rated current: 60A
  • Self-consume:<10mA
  • Batteries:Only fit for OPEN, AGM, GEL
  • Operating Temperature:-35℃~60℃
  • USB output:5V/2A Max
  • Dimension:13.4*7*3.3cm
 
Security Instruction
  • 1.Make sure that the battery has enough voltage for the controller to recognize the type of battery before first installation.
  • 2. The battery cable should be as short as possible to minimize losses.
  • 3. The regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL
  • 4. It is not suitable for nickel metal hydride batteries, lithium ions or batteries.
  • 5.The charge controller is only suitable for the regulation of solar modules. Never connect another load source to the charge controller.
Connection of the system
  • Connect the battery to the charge controller plus and minus.
                1. will be displayed, in case of detecting 12 V battery, 2. in case of detecting 24 V battery.
  • Connect the photo voltaic module to the plus and minus regulator.
  • Connect to the consumer for the charge controller plus and minus.the reverse order applies when uninstalling!
  • An incorrect sequence order can damage the controller!
 
Package
  • 1 x 30A Solar Panel Battery Charge Controller
PushAuction