Condition: BRAND NEW IN ORIGINAL PACKAGING
Warranty: 2 YEAR MANUFACTURER

Authorized Audio-Technica Dealer!
What’s in the box:
Description of ATW-3211/831DE2:
Providing easy setup, versatile operation and rock-solid,
richly detailed high-fidelity sound, Audio-Technica’s fourth-generation 3000
Series wireless systems give users the power and flexibility to operate within
the congested UHF spectrum.
With a class-leading 60 MHz tuning range – more than twice that offered by the
previous versions – the new 3000 Series systems are available in frequency bands
– DE2 (470–530 MHz). Frequencies can be easily scanned and selected on the
receiver and then synced with the transmitter via IR sync functionality. The
3000 Series even lets users set a backup frequency that can be quickly swapped
by pressing the transmitter’s multifunction button in the event of unexpected
interference.
This system configuration features an ATW-R3210 receiver along with an ATW-T3201
body-pack transmitter and an AT831cH miniature cardioid condenser lavalier
microphone. The ATW-T3201 is equipped with Audio-Technica’s new cH-style
screw-down 4-pin connector for secure connection to Audio-Technica’s cH-style
lavalier and headworn microphones, or cables. The transmitter features rugged,
metal housings and is powered by two AA batteries. Charging terminals on the
transmitter work with the ATW-CHG3 and networkable ATW-CHG3N smart charging
docks (sold separately) to recharge NiMH batteries. Antenna power is available
for powered antennas and other in-line RF devices. A ground-lift switch helps
eliminate audible hum caused by ground loops. The system features balanced and
unbalanced audio output jacks.
60 MHz tuning range
With a class-leading 60 MHz tuning range – more than twice that offered by the
previous versions – the new 3000 Series systems are available in four frequency
bands – DE2 (470–530 MHz). Frequencies can be easily scanned and selected on the receiver and then
synced with the transmitter via IR sync functionality. The 3000 Series even lets
users set a backup frequency that can be quickly swapped by pressing the
transmitter’s multifunction button in the event of unexpected interference.
Backup Frequency
Unique multifunction button on the handheld and body-pack transmitters can be
used to switch to a backup frequency (on both transmitter and receiver) should
interference be encountered
Rechargeable
The charging terminals on each transmitter work with the ATW-CHG3 and
networkable ATW-CHG3N smart charging docks (sold separately) to recharge NiMH
batteries.
4-pin connector
The ATW-T3201 is equipped with Audio-Technica’s new cH-style screw-down 4-pin
connector for secure connection to Audio-Technica’s cH-style lavalier and
headworn microphones, or cables
Multifunction button
Unique multifunction button on the body-pack transmitter can be used to switch
to a backup frequency
Charging terminals
Charging terminals on each transmitter work with the ATW-CHG3 and networkable
ATW-CHG3N smart charging docks (sold separately) to recharge NiMH batteries
OLED screens
Transmitters and receivers include OLED screens for optimal readout of key
settings and alerts
Features:
Specifications:
| Microphone | |
|---|---|
| Element |
Fixed-charge back plate permanently polarized condenser |
| Polar Pattern |
Cardioid |
| Weight |
2.8 g |
| Dimensions |
25.0 mm long, 10.2 mm diameter |
| Output Connector |
4-Pin cH-Style screw down connector |
| Cable |
1.4 m long (permanently attached to microphone), 2.6 mm diameter,
2-conductor, shielded cable with screw-down 4-pin cH-style connector |
| Accessories Included |
Clothing clip; AT8444 instrument adapter; AT8116 windscreen;
protective carrying case |
| Overall System | |
|---|---|
| Operating Frequencies | Band DE2: 470.125 to 529.975 MHz |
| Minimum Frequency Step |
25 kHz |
| Modulation Mode |
FM |
| Maximum Deviation |
ATW-T3201: ±38 kHz (THD:10%) |
| Simultaneous Use |
40 Channels per band* For assistance with multi-band operation or other frequency coordination issues, please contact your regional Audio-Technica customer service representitive. *Region and band dependent |
| Frequency Response |
ATW-T3201: 31 Hz to 15500 Hz |
| Operating Range |
100 m |
| Dynamic Range |
ATW-T3201 Mic input: > 115 dB (A-weighted), typical ATW-T3201 Inst input: > 112dB (A-weighted), typical |
| Total Harmonic Distortion |
<1.0% (at 1 kHz, ±17.5 kHz deviation) |
| Operating Temperature Range |
-5 ºC to +45 ºC |
| Receiver | |
|---|---|
| Receiving System | True Diversity |
| Sensitivity |
20 dBuV at 60 dBA S/N ratio (50Ω termination) |
| Maximum Output Level |
XLR / Balanced: +14 dBV 6.3 mm (¼") / Unbalanced: +8 dBV |
| Antenna Input |
BNC-type, 50 O |
| Power Output |
12 V DC, 160 mA (combined) |
| Power Supply |
100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode
external power supply |
| Dimensions |
210.0 mm x 191.0 mm x 43.4 mm (W x H x D) |
| Weight |
1100 g, without accessories |
| Accessories Included |
Two Flexible UHF antennas AC adapter (country dependent) Rack Mount Adaptors |
| Belt Pack | |
|---|---|
| RF Power Output |
High: 30 mW, Low: 10 mW (switchable), at 50 O |
| Spurious Emissions |
Following Federal and National Regulations |
| Input Connections |
4-Pin screw down cH-Style Connector Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +5V |
| Battery Type | |
At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.
Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.
You may return this item for a refund within 30 DAYS of purchase.
Warranty Repair/Exchange Period: 2 YEAR
If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:
Your replacement or refund will process within 3-5 business days of when we receive the item.
Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.
You MUST notify us within 48 hours if you receive an item that was damaged during shipping.
Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.
Item Code: ATW-3211/831DE2+TM80B