Store Categories
Product Overview
Details
3.5mm & 4.0mm Diameter Door Latch Grub Screws Bag of 10 Number Replacement Bolts Suits Residential Doors
Application: Holds door latch keep striker adjustment plates onto full lock plates
Philips head screw head
The older door lock plate keeps were fitted with a little grub screw bolt and nut that allows the keep to be adjusted so that the opening sash can be pulled into the outer frame as required. The bolts used were usually either a 3.5mm or 4.0mm bolt and once lost is hard to ascertain which size bolt is required therefore we have created a bag of 5 of each of the most common size.
Fitting tip: These bolts are for keep latch plates that are tapped out with a thread to accept the bolt. If your keep is the type.
Screw Diameter: 3.5mm x 5no & 4.0mm X 5no = Bag of 10 number
Screw Length: Both the 3.5mm and 4.0mm diameter screws now have a length of 8mm
Sold in bags of 10 (5 x 3.5mm bolts ' 8mm long and 5 X 4.0mm bolts ' 8mm long)
1. Product pictures may show different degrees of subtle color difference on different monitors due to light and other reasons. Please refer to the actual product received for the actual color.
2. There are positive and negative tolerances for product dimensions.
This is the description of Payment Method.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
This is the description of Returns Policy.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
Copyright©2018 DataCaciques
Product Overview
Details
3.5mm & 4.0mm Diameter Door Latch Grub Screws Bag of 10 Number Replacement Bolts Suits Residential Doors
Application: Holds door latch keep striker adjustment plates onto full lock plates
Philips head screw head
The older door lock plate keeps were fitted with a little grub screw bolt and nut that allows the keep to be adjusted so that the opening sash can be pulled into the outer frame as required. The bolts used were usually either a 3.5mm or 4.0mm bolt and once lost is hard to ascertain which size bolt is required therefore we have created a bag of 5 of each of the most common size.
Fitting tip: These bolts are for keep latch plates that are tapped out with a thread to accept the bolt. If your keep is the type.
Screw Diameter: 3.5mm x 5no & 4.0mm X 5no = Bag of 10 number
Screw Length: Both the 3.5mm and 4.0mm diameter screws now have a length of 8mm
Sold in bags of 10 (5 x 3.5mm bolts ' 8mm long and 5 X 4.0mm bolts ' 8mm long)
1. Product pictures may show different degrees of subtle color difference on different monitors due to light and other reasons. Please refer to the actual product received for the actual color.
2. There are positive and negative tolerances for product dimensions.
We can only accept payments via eBay check out. If you have any questions about the payment,please contact us through eBay message.
By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing. Please ensure to read and agree to All eBay terms and Conditions before bidding.
All pictures are for illustration purpose only and colours may vary slightly.
Our store obeys all eBay Rules and Policies.
Once payment is made we can only ship to the address shown on the checkout page without any changes or modification to that address. Please make sure your eBay address is correct before you pay.
It will takes about 7-14 business days for delivery. We will arrange shipping for you within 1-3 business days after payment cleared except the holidays.
If your shipment delays, we hope you can be patient, and at the same time contact us, we will try our best to help you.
We offer 30 days return.
We are not responsible for any purchase after this 30-day period.
You must contact us as soon as you have decided to cancel. If your order has not been despatched it will be cancelled and you will be issued with a full refund.
However, if your order has been despatched you will be liable for return postage costs.
Please note that we cannot give refunds after the 30 day limit has expired.
A full refund will be issued as soon as the goods are received back.
We do our best to process as quickly as possible.
If you have any questions, please do not hesitate to contact us through eBay’s messaging system.
It’s the fastest way to get a reply; most questions are answered within an hour.