Highlights:
1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap， open the valve
2. Connect the waste-disposal tube to the unit
3. Connect the power cord， and switch on the power switch (O=off， l=on)
4. When braking， it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises， remove it， and use the included hex-wrench to adjust the screw on the back cover (18)
5. To check if you need to replace the abrasive disk， rotate the disk by hand and estimate: if the platform jumps more than 2mm， change the disk. After replacing the disk， make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)
Attention:
If there is some abnormal noise when working on
Possible reason：① Axon is loosing ② Disc is not plain enough。
How to solve it：①Dissemble the disc⒃ with spanner，make the snap
Ring tightly；② change the disc。
The machine does not work when power on
Possible reason：① fuse get burnt；② motor get burnt；③ switch get wrong。
How to solve it：① change the fuse（22） which inside the socket；② change the motor；③ change the
Specifications:
Voltage: <A>220V/50Hz±10%
Power: 500W Rotational Speed: 2800 rpm
Dimensions: 44×35×35cm Weight of the dental trimmer: 20kg
Content:
1x JT-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment
- Business Hour: Monday To Friday: 8:30 AM to 6:00 PM (Beijing China time)
- Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
- Please contact us with ebay message.
- Please feel free to contact us if you have any questions.
