Note: When changing your bulb, never touch the glass. Always use gloves or a clean shop towel to reduce the transfer of oils during install.
Specifications:
-Plug Type: 9005 (High Beam) + H11 (Low Beam)
-Voltage: 12V
-Power: 100W/per bulb
-Color Temperature: 4200K Warm White
-Lumens: 4000LM
-Beam Angle: 360 degree
-Connector Type: Wireless, plug and play
-Lifespan: over 800 hours lifetime
-Waterproof Rate: IP65
-Operating Temperature: -40 ~ +80 degree Celsius
-Plug Type: 9005 (High Beam) + H11 (Low Beam)
-Voltage: 12V
-Power: 100W/per bulb
-Color Temperature: 4200K Warm White
-Lumens: 4000LM
-Beam Angle: 360 degree
-Connector Type: Wireless, plug and play
-Lifespan: over 800 hours lifetime
-Waterproof Rate: IP65
-Operating Temperature: -40 ~ +80 degree Celsius
Packing Including:
-2Pcs 9005 Halogen Headlight Bulbs
-2Pcs H11 Halogen Headlight Bulbs
(New and old packaging will be shipped randomly)
-2Pcs 9005 Halogen Headlight Bulbs
-2Pcs H11 Halogen Headlight Bulbs
(New and old packaging will be shipped randomly)
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly
before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior.
1. As a safety precaution, make sure that the car has had time to cool down properly
before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior.
On Jan 9, 2025 at 19:23:24 PST, seller added the following information: