Functional Characteristics:

• Internal Bluetooth & GNSS Antennas

For better signal reception, we designed anintegrated Bluetooth and WiFi antenna.

• Battery Life

Battery life is in the range of 2.5~6hours(depends on user configuration).

• Multiple Positioning Modes

Receive signals from BeiDou,GPS, GLONASS,Galileo to realize stable and reliable positioning.

• Worry-free flight from takeoff to landing

"EabloPilot Tag” informs other nearby flyers of potential hazards during flight, landing or free fall.

Parts & Accessories:

Double-sided velcro used to secure the product body to the drone.

Installation Guide：

1.Attach one Velcroto the drone.

2. Attach the other Velcro to the “EabloPilot Tag”.

3.Attach the "EabloPilot Tag” to the drone.

Procedures for use：

1. Press and hold the switch for three seconds before takeoff to turn on the device.

2. The red power indicator light is steady on to indicate that the device is ready.

3. The takeoff or landing status will be changed automatically, no need to configure manually.

4. Long press the switch for three seconds after the end of the flight, turn off the device.

5. lf you need to charge, the charging cable is inserted into the Type-C port, the charging indicator light will be red for charging, and green for fully charged.

Safty Notes：

1.Power supply use safety

Before connecting the power supply, please make sure that the rated voltage and frequency of the product match the power supply you provide (maximum voltage not more than 5V).

Make sure that all power connections are dry, free of water stains, and away from water sources to prevent short circuits.

2. Fire prevention and heat dissipation

When using the product, please make sure there is enough ventilation space around it and avoid covering or blocking the product's cooling holes to prevent overheating.

Do not use or store electronic products on flammable materials (such as paper, fabric, sofa) to prevent fire.

3. Humidity and Environment

Avoid exposing the product to extreme temperatures. Excessively high or low temperatures may affect product performance or cause damage.

4.Protection from static electricity and electromagnetic interference.

Pay attention to electronic products may be subject to electromagnetic interference, keep a certain distance away from strong electromagnetic field sources, such as large motors, radio transmitting equipment.

5.Repair and maintenance

Do not disassemble the product for maintenance. Any repair work should be performed by anauthorized service center, the warranty is valid for one year after purchase.

For the safety of you and your family, please read and comply with the above safety instructions carefully before using this product.lf you have any questions or encounter problems, please contact our customer service support in time.

WARNING：

Failure to observe the following potential hazards could result in serious injury or even death.

Battery Warning

The product uses a lithium battery.

Failure to follow the guidelines below may shorten the life ofthe battery in the device or risk damage to the device, fire,chemical burns, electrolyte leakage, and injury.

Do not disassemble, modify, puncture, crush, or damage the battery to avoid danger.

Do not expose the device and battery to flame, explosion, or other hazards.

Do not leave the device in a hot environment, such as a dryer, in a car in direct sunlight.

Do not immerse the battery in water or other liquids.

Do not overcharge frequently.

Do not charge the battery under fire or extreme heat.

Please follow the charging requirements strictly to avoid danger caused by excessive current.

lf the product is not used for a long time, please leave the battery fully charged to prolong the battery life.