1: Working Voltage DC 12V
2: Standby current (all relays closed) 4.8MA, 1 relay ON 48MA, ...,ALL relay ON 1510MA
3: ''ON'' ''OFF'' ''Momentary'' ''Self-locking'' ''Interlock'' ''Delay'' ''Open all'' ''Close all''8 Commands
4: MODBUS RTU command, Write 05/06/15/16, Read 01/03
5: Under the ''Delay'' command ,the maximum delay is 255 seconds;
6 MODBUS commands can be made serial HyperTerminal (serial assistant) OR ''Modbus Poll'' Enter;
7 Set the Slave ID through the DIP Switch: 1-63 ID
8 Set BaudRate via DIP switch : 9600/19200/38400/115200BPS
9 Parity :None(Default)/Even/Odd
10 Size :244*90*16MM
(Only Board);
228*106*36MM
(With DIN Box);
11 Weight : 330g(Only Board),447g(With DIN Box)
12 Maximum load: 7A 120VAC;10A 28VDC



Application