Round Die Stock Handle Wrench Set for Tapping 5/8-11 UNC Die 1-1/2" Holder
Round Die Stock Handle Wrench Set
Product Details
1.Features: The die holder provides good wear resistance for long service life. With 4 adjustable screws, the die stock can securely hold round dies and is easy to operate. The alloy tool steel die is not loose for conical locking hole and strong locking, with hardness, high torque, good toughness and wear-resistance.
2.Application: The die handle wrench set can help to process, correct, clean male threads, or repair damaged bolts and threads, or just remove bolts and threaded rod. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
3.Die & Wrench Set: Die Wrench: 38mm x 14mm die stock fits 26mm-38mm outside diameter die / M12-M16 thread die, with 5 adjustable screws Round Die: 5/8-11 UNC threading die with 38mm outside diameter. Die stock, also called die handle or die wrench, are use in round dies only.
4.Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
5.Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
Product Details
1.Features: The die holder provides good wear resistance for long service life. With 4 adjustable screws, the die stock can securely hold round dies and is easy to operate. The alloy tool steel die is not loose for conical locking hole and strong locking, with hardness, high torque, good toughness and wear-resistance.
2.Application: The die handle wrench set can help to process, correct, clean male threads, or repair damaged bolts and threads, or just remove bolts and threaded rod. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
3.Die & Wrench Set: Die Wrench: 38mm x 14mm die stock fits 26mm-38mm outside diameter die / M12-M16 thread die, with 5 adjustable screws Round Die: 5/8-11 UNC threading die with 38mm outside diameter. Die stock, also called die handle or die wrench, are use in round dies only.
4.Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
5.Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
- We accept eBay payment.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- Our US warehouse allows us to ship you the best products quickly and accurately. We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
Round Die Stock Handle Wrench Set for Tapping 5/8-11 UNC Die 1-1/2" Holder
Round Die Stock Handle Wrench Set
Product Details
1.Features: The die holder provides good wear resistance for long service life. With 4 adjustable screws, the die stock can securely hold round dies and is easy to operate. The alloy tool steel die is not loose for conical locking hole and strong locking, with hardness, high torque, good toughness and wear-resistance.
2.Application: The die handle wrench set can help to process, correct, clean male threads, or repair damaged bolts and threads, or just remove bolts and threaded rod. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
3.Die & Wrench Set: Die Wrench: 38mm x 14mm die stock fits 26mm-38mm outside diameter die / M12-M16 thread die, with 5 adjustable screws Round Die: 5/8-11 UNC threading die with 38mm outside diameter. Die stock, also called die handle or die wrench, are use in round dies only.
4.Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
5.Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
Product Details
1.Features: The die holder provides good wear resistance for long service life. With 4 adjustable screws, the die stock can securely hold round dies and is easy to operate. The alloy tool steel die is not loose for conical locking hole and strong locking, with hardness, high torque, good toughness and wear-resistance.
2.Application: The die handle wrench set can help to process, correct, clean male threads, or repair damaged bolts and threads, or just remove bolts and threaded rod. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
3.Die & Wrench Set: Die Wrench: 38mm x 14mm die stock fits 26mm-38mm outside diameter die / M12-M16 thread die, with 5 adjustable screws Round Die: 5/8-11 UNC threading die with 38mm outside diameter. Die stock, also called die handle or die wrench, are use in round dies only.
4.Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
5.Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
- We accept eBay payment.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- Our US warehouse allows us to ship you the best products quickly and accurately. We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
On Dec 24, 2024 at 23:19:52 PST, seller added the following information: