How to connect the AHD 1080P Rear Camera ?
- Car With Canbus Protocol Box
Find the brown rear camera control cable in the power cord (Not necessarily brown, but usually the third from left to right) as shown in the figure: remove the outer plastic skin (Don’t cut it off.) and connect it to the blue cable on the reverse camera. Then wire all the other cables as per the below diagram (Refer to our explanatory image).
- Car Without CanBus Protocol Box
Find the brown rear camera control cable in the power cord (Not necessarily brown, but usually the third from left to right) as shown in the figure: remove the outer plastic skin (Don’t cut it off.) and connect it to the blue cable on the reverse camera. Connect the red wire of camera to the positive pole of reversing light (which provides power for the reversing camera), and the black wire is insulated and isolated. Other positions are connected as shown in the figure