Note: Bits are not included

Note: Does not come with screwdriver head.



Feature :

Minimum Effort. Maximum  Efficiency

Easy to control  - tools stops immediately after deactivation via electronic brake 
Dual-activation mode – Simply push tool or press button to begin 
Precise or Power – Mechanical clutch with 5 torque settings and maximum performance mode
Mechanical Clutch – Precise with 5 torque setting and maximum performance mode 
Electronic Brake – easy to control as the tools stops immediately after deactivations
Ergonomic – easy to grip when working in multiple positions
¼” HEX Bit Holder – highly flexible, fits to all possible bits 
Strong spindle – Shift between manual and power mode
Speed: 360RPM – deliver fast and smooth operation while still maintaining the same powerful performance
Comes with a 6 months warranty

Specifications :

Voltage : 3.6
Battery (Ah) : 1.5
Torque (Nm – Hard/Soft/Min) : 5/2.5/0.2
Speed (RPM) : 360
Electronic Brake : Yes
Smart Stop : Yes
Activation Mode : Push Start & Press Button
Mechanical Clutch Settings : 5 + Maximum Performance Mode
Charging Port : Micro USB
Tool Holder : ¼” Inter HEX

FAQ :

1)How to start the tool?
- Select the direction from F/R switch and push the tool OR Press the button

2)Can this tool use as a manual screw driver?
- Yes, put the F/R switch to neutral position, then the tool can be used as manual screw driver

3)How much screws can be done per charge?
- Approx. 196pcs 3.5x35mm screwing into softwood,
- Approx. 200pcs 3x60mm machines screw into plastic.

4)Where is the charger for the tool?
- All SKU doesn't come with a charger. However you can use your phone USB adaptor to charge the tool with supplied micro-USB cable

5)When should I charge the tool?
- When the battery capacity is below 33%, the charge indicator LED will start to blink during activation. This indicate the tool should be charge.

6)How to know when the tool is fully charge?
- During charging process, the charge indicator LED will blinking continuously. After full charge, the LED will stop blinking and stay ON.

7)What's the charging time?
- 90min for 100%. 60min for 80%

8)Can I use the tool while charging?
- No, the tool won't work once start charging.

9)How is the performance of the tools?
- It is same powerful as previous generation, however is more precise with mechanical clutch now

10)How to select the right torque?
-The torque setting has 5 levels, which shows from small screw to big screw. The tool will start clutching once reach the desired torque. Turn to Max mode for full power.
Note: When set to Max mode, tool won't stop. it will stop only if reach the maximum torque of the tool.