Groove Pulley Wheel for Rope Wall Mounted 1 Pack

Features:

• 【High Quality】Each U Type Single Wheel Pulley Block is made of high quality stainless steel, which has 4 mounting holes and is suitable for wire/rope of 3-12 mm. The stainless steel pulley block can bear up to 441 lbs with the diameter of 1.89 inch, the load capacity will be affected by the different installation angle and installation on a different material plane, such as walls, wood and metal
• 【Silent Duplex Bearing Design】The groove wheel pulley has two silent and wear-resistant duplex bearing, making the cable pulley run smoothly and stably, which can greatly reduce the friction and the noise of the cable pulley, you can hardly hear the sound when it works
• 【Wide Application】The Wall Mount Pulley Block has wide range of applications, it can be used for wire rope traction, home gym pulley system as DIY attachment, sliding gate, store lifts, dog gate, inverted track, lifting blocks and other outdoor works
• 【Easy installation】The Stainless Steel Pulley is easy for you to install. First, you just need to mark the hole location with a pen. Next, drill 4 holes with a 8 mm drill bit in the wall and then insert the yellow expansion pipes in the holes. Finally, fix the pulley with the self-tapping screws
• 【What You Get】You will get 1 pack of U Type Single Wheel Pulley Block with the diameter of 1.89 inch. Also equipped with 4 pcs applicable yellow expansion pipes and 4 pcs corrosion resistant self-tapping screws. All dimensions are measured manually, please allow 1-3 mm differences.

Description:

【High Quality】Each U Type Single Wheel Pulley Block is made of high quality stainless steel, which has 4 mounting holes and is suitable for wire/rope of 3-12 mm. The stainless steel pulley block can bear up to 441 lbs with the diameter of 1.89 inch, the load capacity will be affected by the different installation angle and installation on a different material plane, such as walls, wood and metal.【Silent Duplex Bearing Design】The groove wheel pulley has two silent and wear-resistant duplex bearing, making the cable pulley run smoothly and stably, which can greatly reduce the friction and the noise of the cable pulley, you can hardly hear the sound when it works.【Wide Application】The Wall Mount Pulley Block has wide range of applications, it can be used for wire rope traction, home gym pulley system as DIY attachment, sliding gate, store lifts, dog gate, inverted track, lifting blocks and other outdoor works.【Easy installation】The Stainless Steel Pulley is easy for you to install. First, you just need to mark the hole location with a pen. Next, drill 4 holes with a 8 mm drill bit in the wall and then insert the yellow expansion pipes in the holes. Finally, fix the pulley with the self-tapping screws.【What You Get】You will get 1 pack of U Type Single Wheel Pulley Block with the diameter of 1.89 inch. Also equipped with 4 pcs applicable yellow expansion pipes and 4 pcs corrosion resistant self-tapping screws. All dimensions are measured manually, please allow 1-3 mm differences.

If you need more quantity than shown available - just send me a message and I'll increase the purchased limit for you 🌺

SHIPPING

We are always working hard to ensure your package arrives as soon as possible.
Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control.
We offer free shipping to the lower 48 states.
We do not accept P.O. Boxes. Please provide a physical address.

Thank you 🌺