•  
  • Product Description
  •  
  • This 100% new electronic throttle body matches the original equipment part for fit and performance. With a corrosion-resistant aluminum body, it features a new sensor and circuit board for reliable performance.
  •  
  •  
  • Your Checklist
  •  

    • For Honda Accord 2006-2007 Civic CR-V Acura CSX 2.4L Throttle Body

     

    Product Description

     

    This 100% new electronic throttle body matches the original equipment part for fit and performance. With a corrosion-resistant aluminum body, it features a new sensor and circuit board for reliable performance.

     

     

    Your Checklist

     

    • Direct replacement - this electronic throttle body matches the original equipment throttle body for fit and function
       
    • Plug and play installation - this throttle body plugs into the original equipment wiring harness with no adapter required
       
    • Cost-effective and reliable - offers original manufacturer quality at a competitive price with no core charge
       
    • Rigorously tested - this throttle body has undergone corrosion and try-on testing to ensure durability for a long service life

     

     

    Bad Throttle Body Symptoms：

    Common symptoms of a failed throttle body include poor performance, rough idle, stalling and an illuminated check engine light.

     

     

    Install the Throttle Body as follows: 

     

    Part 1: Removing the throttle body

     

    Materials Needed: Gasket Scraper, Plier Assortment, Screwdriver Assortment, Socket Set, Wrench Set

     

    Step 1: Locate the throttle body. The throttle body is mounted between the airbox and the intake manifold.

     

     

    Step 2: Disconnect the negative battery cable. Disconnect the negative battery cable and set it aside.

     

    Step 3: Remove the air intake tube. Loosen the clamps on each end of the air intake tube with a screwdriver. Then slide the air intake tube off.

     

    Note: In some cases, the air intake tube may also have hoses and electrical connectors attached to it that must also be removed.

     

    Step 4: Remove the throttle controller electrical connector(s). Remove the throttle controller electrical connector(s) by pushing down on the

    tab and pulling it off. In some cases, the connectors may also have tabs that need to be pried back using a small flathead screwdriver.

     

    Step 5: Remove the throttle body bolts. Using a ratchet, remove the bolts holding the throttle body to the intake manifold.

     

    Step 6: Remove the throttle body.

     

    Step 7: Remove the throttle body gasket. Carefully remove the throttle body gasket by using a small screwdriver to pry it off. Clean any remaining gasket material by using brake cleaner applied to a rag.

     

    Part 2 : Installing the new throttle body

     

    Step 1: Install the new throttle body gasket. And mount the new throttle body in position.

     

    Step 2: Install the throttle body bolts. Install the throttle body bolts by hand one at at time. Then tighten them down using a ratchet.

     

    Step 3: Reinstall the electrical connector(s). Reinstall the connectors in the same way that you removed them.

     

    Step 4: Reinstall the air intake tube. Slide the tube into place and tighten down the clamps using a screwdriver.

     

    Step 5: Reconnect the negative battery cable. Reconnect the negative battery cable and tighten it down.

     

    Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

     

     

    Warranty:

     

    This product is covered by our 1-year warranty.

    If a failure occurs due to a manufacturing defect during the expected use, we will replace the part free of charge

     

     



    Payment
     
    We allow to pay by Credit Card, Direct Debit, VISA, eCheck, or other methods.
     
    For multiple purchases, please add items to your Ebay shopping cart and pay once for entire order.
    Shipping

    All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.

    We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.

    Returns

    All of our brand new items come with a 60-Days money-back guarantee.

    If you are not satisfied with your purchase, you can return the item with original packaging back to us for full refund, not any re-stock fee. The return cost should be paid by seller.

    Kindly contact us for return instruction before returning.

    If you receive any wrong items, or damage during the transportation or defect items, we will accept the return and pay the return freight. Please noted that the return cost should be prepaid by buyer, we will issue the refund of return cost to buyer after inspecting the faulty item.

    The full refund or replacement will be available for all faulty items, including the original shipping cost.

    Please kindly contact us before return, our representatives will send you the detailed return instruction. 

    The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.

    Contact Us

    We fully understand how challenging it is to be a successful transaction. If you are not 100% satisfied with your purchase, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration!

    Warning

    Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.

    Best Sales
    Newly Listed
    Terms & Contact
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    For Honda Accord 2006-2007 Civic CR-V Acura CSX 2.4L Throttle Body

     

    Product Description

     

    This 100% new electronic throttle body matches the original equipment part for fit and performance. With a corrosion-resistant aluminum body, it features a new sensor and circuit board for reliable performance.

     

     

    Your Checklist

     

    • Direct replacement - this electronic throttle body matches the original equipment throttle body for fit and function
       
    • Plug and play installation - this throttle body plugs into the original equipment wiring harness with no adapter required
       
    • Cost-effective and reliable - offers original manufacturer quality at a competitive price with no core charge
       
    • Rigorously tested - this throttle body has undergone corrosion and try-on testing to ensure durability for a long service life

     

     

    Bad Throttle Body Symptoms：

    Common symptoms of a failed throttle body include poor performance, rough idle, stalling and an illuminated check engine light.

     

     

    Install the Throttle Body as follows: 

     

    Part 1: Removing the throttle body

     

    Materials Needed: Gasket Scraper, Plier Assortment, Screwdriver Assortment, Socket Set, Wrench Set

     

    Step 1: Locate the throttle body. The throttle body is mounted between the airbox and the intake manifold.

     

     

    Step 2: Disconnect the negative battery cable. Disconnect the negative battery cable and set it aside.

     

    Step 3: Remove the air intake tube. Loosen the clamps on each end of the air intake tube with a screwdriver. Then slide the air intake tube off.

     

    Note: In some cases, the air intake tube may also have hoses and electrical connectors attached to it that must also be removed.

     

    Step 4: Remove the throttle controller electrical connector(s). Remove the throttle controller electrical connector(s) by pushing down on the

    tab and pulling it off. In some cases, the connectors may also have tabs that need to be pried back using a small flathead screwdriver.

     

    Step 5: Remove the throttle body bolts. Using a ratchet, remove the bolts holding the throttle body to the intake manifold.

     

    Step 6: Remove the throttle body.

     

    Step 7: Remove the throttle body gasket. Carefully remove the throttle body gasket by using a small screwdriver to pry it off. Clean any remaining gasket material by using brake cleaner applied to a rag.

     

    Part 2 : Installing the new throttle body

     

    Step 1: Install the new throttle body gasket. And mount the new throttle body in position.

     

    Step 2: Install the throttle body bolts. Install the throttle body bolts by hand one at at time. Then tighten them down using a ratchet.

     

    Step 3: Reinstall the electrical connector(s). Reinstall the connectors in the same way that you removed them.

     

    Step 4: Reinstall the air intake tube. Slide the tube into place and tighten down the clamps using a screwdriver.

     

    Step 5: Reconnect the negative battery cable. Reconnect the negative battery cable and tighten it down.

     

    Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

     

     

    Warranty:

     

    This product is covered by our 1-year warranty.

    If a failure occurs due to a manufacturing defect during the expected use, we will replace the part free of charge

     

     



     
    We allow to pay by Credit Card, Direct Debit, VISA, eCheck, or other methods.
     
    For multiple purchases, please add items to your Ebay shopping cart and pay once for entire order.

    All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.

    We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.

    All of our brand new items come with a 60-Days money-back guarantee.

    If you are not satisfied with your purchase, you can return the item with original packaging back to us for full refund, not any re-stock fee. The return cost should be paid by seller.

    Kindly contact us for return instruction before returning.

    If you receive any wrong items, or damage during the transportation or defect items, we will accept the return and pay the return freight. Please noted that the return cost should be prepaid by buyer, we will issue the refund of return cost to buyer after inspecting the faulty item.

    The full refund or replacement will be available for all faulty items, including the original shipping cost.

    Please kindly contact us before return, our representatives will send you the detailed return instruction. 

    The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.

    We fully understand how challenging it is to be a successful transaction. If you are not 100% satisfied with your purchase, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration!

    Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.


    All rights reserved.