ks-sf19s-banner.jpg


61vxz06iwbL.jpg


Product Parameter


Material:the host is with new import ABS shell, more durable!

the remoter is with metal drawing effect, more up-market

Host Size:30*56*18mm  Magnet Size:9*35*13mm 

G.W:38g Color:White

Batteries:3 pcs LR44 batteries for the host.(Contain)

Frenquency:433.92MHz

Alarm Volume:110dB(Test distance is 30cm)

Battery life: continuous standby over 1 year(according to control five times a day)

Working environment temperature: -10C ~60C degrees Celsius

Working environment humidity: < 80%

Storage Temperature: -20C~70C degrees Celsius

                                                                                                                                                                                                                                                                                                                                                                                                                 

4 modes Alarm

ks-sf19s-1.jpg ks-sf19s-2.jpg ks-sf19s-3.jpg ks-sf19s-4.jpg

Normal alarm mode
1. Turn on the switch, the alarm host will sounds two short beep “De.De” indicating it’s in arming mode one.

2. In this state, once the magnet is apart from the alarm host, it will keep giving out alarm until the magnet and alarm get closer again or someone turns off the switch.











Constant alarm mode
1. First, make sure the magnet and alarm host are in the safe distance(10mm).

2. Turn on the switch, it will sounds “De.De”, within 15 seconds after the beeps, turn down and up the switch, then it will sounds a longer beep “De….”indicating it’s in the second arming mode.

3. In this mode, when the door or window is open it will give out alarm for 30s until someone turn off the switch.







Closing door reminder mode
1. First, make sure the magnet and alarm host are in the safe distance(10mm).

2. Turn on the switch,it will sounds “De. De”, after the beeps, turn down and up the switch, it will sound “De…”, after this beep, turn down and up the switch again, then it will sounds three short beep “Di Di Di” indicating it’s in the closing door reminder mode.

3. In this mode, when the door or window remains open, it will sounds “Di Di Di” to remind the door or window is open, and the beeps will become louder and louder until the door or window is closed or you turn off the switch.



Doorbell mode
1. First, make sure the magnet and alarm host are in the safe distance(10mm).

2. Turn on the switch, it will sounds “De. De”, after the beeps, turn down and up the switch, it will sound “De…”, after this beep, turn down and up the switch again, then it will sounds three short beep “Di Di Di”, after this beep, turn the switch down and up again, it will sound “Ding Dong” indicating it’s in doorbell mode.

3. In this mode, when you open the door or window, it will sound “Ding Dong” once.






Other details ...

[Super Loud Alarm]Door/window anti-theft alert has up to 110lb LOUD alarm, scare off potential thieves effectively, also prevent children /pets going out the house without notice.
[Widely Applicable]small size alarm suitable for window (sliding/crank/hung so on ), pool doors, refrigerator, drawer, freezers, interior door for kids safety. battery can last longer.

[Battery low indicate]
When the alarm battery runs low, every time you turn on the power, the alarm host will sounds “ Du…” for about half second.
When the alarm works in low battery, it will give our “ Du..Du” every half an hour.
When the alarm is in low battery state, it still can work for about 10 ~30 days, please replace the battery.

NOTE
●The alarm should be used indoor only. Don’t install it at the place where there is sunshine or rain.
●The magnetic sensor is at the right side of the host, so the magnet should be installed on the right side of the alarm host .
●If the alarm is installed on the door, please install the magnet on the frame of the door. If you install the alarm on the frame of the door, then install the magnet on the door. Make sure that when the door is opened, the magnet is separated from the alarm, so that it can be detect and trigger alarm.
●When installing, make sure the distance between the alarm and the magnet should not be more than 10mm when the door or window is closed


 e1391e96ed278caecbe9e2a5c441046.png
How to transform 4 functions by on/off button?


On & off the switch 1 time, it is in Alarm mode. It alarms when doors or windows is open; Stops when they are closed.
On & off the switch 2 times, it is in Constant Alarm mode. It alarms at least 10s when triggered.
On & off the switch 3 times, it is in Closing-door Hint mode. It sounds "Di--Di-Di" when doors windows is open; Stops when they are closed.
On & off the switch 4 times, it is in Doorbell mode. It sounds "Dingdong" when doors or windows is open.
Attention: Every time switch on & off button should within 3s after the beep of the last switch on & off. Otherwise it start anew.

PushAuction


On Nov 12, 2024 at 08:51:54 PST, seller added the following information:

DataCaciques