High Quality Belt Suit For Toro 42" Selected Models TimeCutter Ride On Mowers AU
BrandSUPERCOOLING
ColourGrey
Compatible BrandFor Selected Toro
ModelBelt
Width1/2 inch
Compatible ModelFor Selected Toro
MPNN/A
Number in Pack1
TypeBelt
Manufacturer WarrantyLifetime
StyleDry Cloth
MaterialPara Aramid Fiber (Kevlar)
Outer perimeter113''
Package Including1x Belt
UPC783952238461
OEMToro 119-8819
MaterialPara Aramid Fiber (Kevlar)
High Quality Belt Suit For Toro 42" Selected Models TimeCutter Ride On Mowers AU
 
 
How to Install Ride On Mowers Belt:

Turn Off the Mower: Ensure the mower is completely off, with the ignition key removed and the spark plug disconnected for safety.

Lift the Mower: Use a jack or place the mower on a stable, flat surface to give you easy access to the mower's underside.

Remove the Cutting Deck:

Lower the cutting deck to its lowest setting.
Detach the clips or bolts holding the deck in place.
Slide the deck out from under the mower to expose the belt and pulleys.

Remove the Old Belt:

Locate the belt path around the engine pulley, blade pulleys, and tensioner.
Use a wrench to loosen the tensioner pulley, which will release the tension on the belt.
Remove the old belt from the pulleys and set it aside.

Install the New Belt:

Place the new belt around the engine pulley, blade pulleys, and any idler or tensioner pulleys, following the specific routing pattern in the mower’s manual.
Make sure the belt fits snugly around each pulley.

Re-tension the Belt:

Use the tensioner pulley to apply proper tension to the belt. Ensure the belt has a firm but not overly tight fit, allowing for some flexibility but no slack.

Reattach the Cutting Deck:

Slide the cutting deck back under the mower and secure it with clips or bolts.
Ensure the cutting deck is properly aligned and all connections are tight.

Test the Mower:

Reconnect the spark plug and lower the mower.
Start the mower and engage the cutting blades to test the new belt. Ensure smooth operation and no slipping.
 
Features:

Durable Construction: Made from high-quality materials, such as rubber or reinforced fabric, to withstand the wear and tear of regular mowing.

Heat Resistance: Designed to tolerate high temperatures generated by the engine and friction during operation, preventing premature wear.

Flexibility and Stretch: Engineered to provide optimal flexibility and stretch, allowing for smooth operation and effective power transmission.

Precision Fit: Available in various sizes and configurations to ensure a perfect fit for specific ride-on mower models, promoting efficient performance.

Resistance to Environmental Factors: Built to resist damage from UV rays, moisture, and chemicals, extending the lifespan of the belt in outdoor conditions.

Low Noise Operation: Designed to minimize noise during operation, contributing to a quieter mowing experience.

Easy Installation: Many belts are designed for straightforward installation, allowing users to replace them without extensive tools or technical knowledge.

Power Transmission Efficiency: Optimized for efficient power transfer from the engine to the cutting deck, ensuring effective grass cutting and performance.

Compatibility: Often compatible with various brands and models of ride-on mowers, making them versatile for different lawn care needs.

Cost-Effective Maintenance: A reliable belt helps reduce maintenance costs by preventing damage to other mower components caused by a failing belt.

 
Specification:
Type: Belt
Model: A series A111
Style: Dry Cloth
Material: Para Aramid Fiber (Kevlar)
Outer perimeter: 113''
Width: 1/2 inch
OEM: Toro 119-8819
 

Fitment:

Compatible with Toro 42" Cut
Compatible with Selected Toro Ride On Mowers
Compatible with Toro Models:
Toro TimeCutter MX 4200 [MX4200] (model 74766 years 2017 to 2019),
TimeCutter MX 4225 [MX4225] (model 75746TA years 2020 to 2021),
TimeCutter MX 4250 [MX4250] (models 74760 years 2015 to 2019, 74760TA year 2021),
TimeCutter MX 4275 [MX4275] model (75745TA years 2020 to 2021),
TimeCutter SS 4216 [SS4216] (model 74616 year 2014),
TimeCutter SS 4200 [SS4200] (models 74622 year 2011, 74623 year 2012 and 74720 years 2015 to 2017),
TimeCutter SS 4225 [SS4225] (models 74726 years 2018 to 2019 and 75742TA years 2020 to 2022),
TimeCutter SS 4250 (model 74723 years 2015 to 2016),
 TimeCutter SW 4200 (model 74784 years 2015 to 2016),
TimeCutter ZS 4200 [ZS4200, ZS4200T CE] (model 74386 years 2011 to 2014),
TimeCutter ZS 4200S [ZS 4200S CE] (model 74389 years 2012 to 2014) and
TimeCutter ZS 4200TF [ZS4200TF]



 Package Including:
1x Belt

We accept PayPal and Bank Deposit in terms of payment options and payment is required within 7 days of purchase. If you have any issues regarding payment, please contact us by phone or by message and we will sort it out as soon as possible

*Paypal allows you to pay by credit card, debit cards,bank transfers and Paypal account Balances.

*Payment must be fulfilled within 7 days since auction's ending.

Unpaid dispute will be filed to eBay for the non payable bidders except getting buyer's updated news.

We only accept PayPal payments from verified accounts with confirmed addresses.

Orders will be shipped after receiving cleared payment.

Payment due within 3 days after auction ends and for buy it now listings.

Item(s) would be shipped out within 1 working days after received your confirmed payment.

Please kindly note weekends and holidays are not working days.

We only could ship to the address that's stated on your PayPal account as the shipping address unless the correct address was stated on the PayPal notes section. E-mailing us after you have made payment does not count so please update your shipping address on PayPal before making a payment.

Note: If there’s no photos or videos evidence or the False evidence and accusation,we have the rights to deny the request of the quality problem from customers. when necessary,we will seek legal support. Details of the above for our policies, in the premise of not violating ebay related trade policy, the policy enjoy the same legal effect, the policy will take effect after your purchasing.Thanks for your support and understanding.
On the rare occasion that an item arrives dead on arrival or damaged, please contact us as soon as possible.

We must be notified within as soon as possible of you receiving the damaged item.

Warranties are offered by the product manufacturers and importers, any items that may be in question must be sent back to TOPSPEED and then to the manufacturer or importer for an assessment.

If the item is faulty in operation and approved by the manufacturer it will be returned to the buyer at no extra cost. It is the buyer's responsibility to return the goods to TOPSPEED, please contact us for the correct shipping details and return approval.

For all returned items, the buyer is responsible for all postage costs.

We are very careful sending out goods, but in the off chance of you receiving the wrong item please follow the following guideline.

If the item has been supplied incorrectly by TOPSPEED, then TOPSPEEDwill refund shipping costs of the goods when the original item is returned.

All items that are approved for return must be received back in the original packaging and not installed, modified or damaged in any way.

On the special condition that an item needs to be returned due to a change of mind, please read the following guidelines.

We must be notified within 7 days of you receiving the item that you intend to return. The item must then be returned within 7 days following this notification.

All items that are approved for return must be received back in the original packaging and not installed, modified or damaged in any way.

The item/s are not opened, used, worn or damaged, and are in perfect condition when we receive them back.

That you do not stick or write anything on the item itself or its packaging. You may be required to wrap the item and attach postage stickers and any labels to the outer packaging you supplied.

Refunds are for products only, all shipping and handling costs / labour are at the expense of purchaser.

If the item has sustained damage in transit, or does not return as noted above, a revised refund amount may be required.

Parts that have been abused, installed, modified, or damaged will not be accepted for a refund.

Items bought by mistake or qualifying for exchange: the buyer is fully responsible for all return shipping costs, and a 20% restocking fee may apply with certain items.

We are not liable for any claim including claims arising from incorrect fitment, product modification, and fault design, the use of the product and any indirect special or consequential damage or injury or person, company or entity.

The refund amount will also have original freight costs deducted. If the item was sent with free postage, a 20% postage fee will also be deducted from the refund amount.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.


Note:If you are paid via a PayPal e-cheque, the money will take several business days for it to go back into your paypal account.


Refunds by law: In Australia, consumers have a legal right to obtain a refund from a business for goods purchased if the goods are faulty, not fit for purpose or don't match description.
HERE! Get The Right Parts You After
SUPERCOOLING are an established company which has a rich knowledge of automotive accessories. We stock most models of auto parts including Japanese, European, Korean and American models.

SUPPERCOOLING are an established company which has a rich knowledge of automotive accessories. We stock most models of auto parts including Japanese, European, Korean and stock around 4500 different models of radiators, condensers, coolant pipes, fans., intercooler /kits, coilovers, lift kits and some performance parts. We have over 6000 square meters warehouse in Australian, New Zealand, HK, USA and UK, our sales teams have professional knowledge of automotive parts, so our service is second to none. We will go out of our wayto get you what you need on time, with the best quality and at best price.

Kindly reminding:
We do not list everything online, so if you have problem to identify your item or have any technical issues, please send us a message.

We will be happy to help you find the right parts at the right price.


Please note:

Quite often certain vehicles may have two different parts for the same application to ensure you are receiving the correct part for your vehicle you will need to send us the part numbers from the original part fitted to your vehicle. SUPERCOOLING will not be liable for any associated costs if the correct part has not been confirmed by an SUPERCOOLING staff member via ebay messages this includes all shipping costs and a restocking and handling fee may apply.

Radiator installation

1.Place new radiator back into the vehicle.

2.Hand- thread transmission and/or engine cooling lines back into the radiator tanks.
Stripping or cross threading coolers, plug or fittings will void manufactures warranty.

3.Tighten all line fittings using hand wrenches. Only torque to manufacturer’s specifications. Do not over
tighten.

4.Reconnect and tighten all radiator hose connections and tighten drain tap securely.

5.Reconnect air conditioning condenser fasteners, fan shroud and electric fan assembly where applicable.

6.Your cooling system was holding used coolant. After the new radiator has been installed your entire
cooling system needs to be flushed with proper flushing chemicals using an approved flush + fill
machine or kit :
Failure to completely flush the system will void the manufacturer’s warranty on the radiator.

7.Filling your system with new radiator coolant :
i) Only use coolant that is recommended by the vehicle manufacturer;
ii) Never mix different types of used or old contaminated coolant;
iii) Always mix coolant 50/50 with distilled or deionised water. Never use tap water.
iv) Pre-mixed solutions may be used in some cases. Refer to repair manual for approval and
recommendations.
v) Fill the cooling system to the required level as outlined in the repair manual. In some cases the
vehicle must be raised during the filing process to allow for the fill point to be above the heater core
for proper purging during the filling process.
Important, some vehicles are equipped with bleeder valves to remove any air bubbles in the
cooling system. Usually located near the thermostat housing, the valve needs to be opened
to bleed the system when starting the vehicle (Step 8). Close the valve when air bubbles
cease. Refer to repair manual.

8.Start the vehicle with your heater control switches inside the vehicle on the ‘High’ heat position.

9.Allow the vehicle to warm-up long enough for the thermostat to open allowing coolant to flow. You will
notice the radiator hose will become warm to hot.
Caution: Surfaces and hoses become very hot. As the coolant level drops, top off with the

exact same mix used in the filling process. Stop when the coolant level settles to just below
the radiator filler neck or fill line. Use a new radiator cap as specified for your vehicle. Refer to
repair manual for the proper radiator cap specifications. Fill the coolant recovery bottle located
inside the engine compartment to the required level again with the exact same mix of coolant
used in the filling and purging process.

10.While engine is running check all fittings hoses and lines for any leaks.

11.After driving your vehicle for a few miles after the installation allow the vehicle to completely cool
down. Top off the systems to the full mark again and make sure the same type and mixture of coolant is
used.

12.Annual cooling system maintenance is required to insure proper cooling system operation.

PushAuction