Steel radiator bolt on bracket kit K tuning K20-K24 motor
application:
All models: EG, DC2, EK 1992-2000 Civic We have designed a bolted rad direct support system for your K exchange frame.
Relocating your radiator has never been easier!
These bolt brackets for OEM upper and lower rad supports allow you to easily install the radiator on the driver's side of the engine compartment.
Our universal kit includes 2 different top brackets, one for the frame and one for the EG EK / DC2 frame.    The kit is equipped with galvanized hardware.
The top rad bracket is powder coated with silver powder.
The lower bracket is made of stainless steel and uses high-quality polyurethane sealing rings.
In fact, nothing is easier than this.
As you can see in the photo below, the well nut slides through a hole in the lower radiation bracket.
Then after tightening the mounting bolt, it will snap the nut to the back, creating a safe mounting point for your new rad bracket.    Simple and effective.
Install the hardware mounting bracket
1. Start with a 1/8inch drill bit and drill carefully to complete the marking.    After that, you can drill the hole to the final ½inch size.    
2.   Then, insert the nut into the hole.    
3.    Tighten the M6 bolt.