• Protect your drainage system by using a grate and low-profile adapter on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through
• Ideal for draining moderate water flows from lawns, landscaped areas, patios, walkways, and under downspouts
• Fits 3 in. & 4 in. Sewer and Drain Pipes & Fittings, 3 in. & 4 in. Single-Wall Corrugated Pipes, 3 in. & 4 in. Triple-Wall Pipes
• 14.4 sq. in. open surface area
• 44 GPM flow rate
• Rated for NDS Class A loads (up to 60 psi) when properly installed-recommended for pedestrians, bicycles, and wheelchair traffic; ADA compliant and heel-proof
• Grate top is 5-7/8 in. square with ¼ in. grate openings; Low-profile adapter is 2-1/2 in. high, top opening is 6-3/16 in. square
• 6 in. Square Drain Grates (with Low-Profile Adapters) are available in a variety of colors and materials
• Comes with one 6 in. Square Grate and Low-Profile Adapter
• Works with connected drain pipe to capture and convey excess surface water for proper release downstream
• Place low-profile adapter on top of drain pipe or drain fitting, for a soil-tight fit; place 6 in. drain grate on top of low-profile adapter
• High-density polyethylene (HDPE) using a combination of virgin and recycled content treated with UV inhibitors to prevent fading and cracking
• Use sewer and drain fittings when you need to make turns from the drain grate to drain pipe
• Use with a Pop-Up Drainage Emitter to discharge collected water at a point of release downstream
• Use with a Flo-Well Dry Well System and EZ Drain Gravel-Free French Drain System to detain excess water and slowly release it into the ground
• Onsite stormwater management protects the watershed downstream, and limits excess runoff which can lead to negative impacts such as erosion, pollution, and flooding