About the HP-770HC-APP Multimeter HP-770HC Upgrade Version)
High Accuracy and Wide Multimeter Automatic range of 6000 counts. DC voltage range: 60 mV to 1000 V; AC voltage range: 60 mV to 750 V; DC current range: 600 μA to 600 A; AC current range: 600 μA to 600 A; Resistance Range: 600Ω to 60mΩ; Temperature Range: -4 to 1832°F
More practical functionsData retention, auto backlight, auto power off, function switch display, °C/°F, MAX/MIN, True RMS; with AC/DC 600A clamp. You can use it in your company, factory, etc., as well as your car and home appliance.
Multifunction Meter Measure DC/AC voltage, DC/AC current, resistance, capacitance, frequency, relative value, temperature. Diode test, triode test hFE, off-on test, non-contact voltage measurement (NCV)Bluetooth connect to phone
Mechanical Blocking System This is a function of the device. You must turn the dial before inserting the reader. You can also turn the dial after pulling out the test lead. This function prevents a short circuit.
DC voltage: 60mV / 600mV / 6V / 60V / 600V ± (0.5% + 2dgt) / 1000V ± (0.8% + 2dgt),
AC Voltage:60mV/600mV/6V/60V/600V±(1.0%+10dgt)/750V±(1.5%+3dgt),
(TRMS)DC Current:600uA/6000uA/60mA/600mA ±(1.5%+2dgt),6A/20A(±2.5%+5dgt); 600A (± 3.0% + 5dgt)
AC current: 600uA / 6000uA / 60mA / 600mA ±(1.5% + 3dgt),6A / 20A (± 2.5% + 5dgt); 600A (± 3.0% + 5dgt),
(TRMS)Resistance: 600Ω ~ 60MΩ
Capacitance:6nF-60mF
Frequency:9.999HZ-9.999mHZ
Utilization rate:0.1%99.9%:
Temperature: -20~150,150~1000
Diode detection:YES
On-Off Detection:YES
NCV:YES
Holdpeak 605A AC/DC Current Adapter - Adapting standard output banana plugs, this amperage clamp-on meter is compatible with most digital current testers. It enables your multitester measures current data up to 600A and allows your oscilloscope measures ampere waveform accurately.
- No need to break the circuit for amps measuring. Just clamp the big jaw caliber around one conductor under measured and get readings on multimeter.
- KINDLY REMINDER: Clamp on only ONE wire, or different direction current will offset and get wrong result.
Specifications:
- DC Current: 600 A
- AC Current: 600 A
- Jaw Caliber: 1.77 inch
- Output Conversion: 1mV/1A
- Conversion Accuracy: +/- 3.0% + 5 digits
- Output Impedance: 10K
- Dimension: 7.05*3.54*1.42 inch
【AC/DC 600A Clamp-on Probe】Capable of measuring AC/DC up to 600 amps, This clamp adapter is built for higher current measurement.【Great Companion Probe for DMMs】It’s recommended to use BT-605A with BTMETER multimeters: 770K, 770M,770HC-APP for easy accurate measurement. When use it with other brands multimeters, dial to mV range for ampere measurement, 1mV = 1A output
【Accurate Ampere Measurement】+/- 3.0%+10 accuracy for signal output conversion. The arrow on the Jaw indicates the DC current direction of positive current flow ( from positive to negative)
【Easy to Use】Maximum Jaw Caliber Size up to 1.77 inches (45mm), allows you to make accurate AC or DC amperage measurement up to 600 amps without breaking the circuit.
【Tips】Clamp the amp probe around the live wire only to get the current reading, or use an “AC line splitter”. 1mV = 1A output & standard 3/4 inch banana plugs makes it compatible with most multitesters that features with 1mV sensitivity.
Perfectly work with Holdpeak multimeters, such as: 770M, 770N, 770K, 770HC-APP, etc.
When perform DC current measurement, always press “REL” key on multimeter to zeroes it out.
When perform AC current measurement, always use the clamp go round the live wire only, or use "AC line splitter"
Connect the black banana plug of the BT-605A AC/DC Current Clamp Adapter to "COM" port and the red banana plug to the "µA mA" port.
Press “SELECT” button on the multimeter and press AC/DC button on the Clamp Adapter to choose “DC” or “AC” measurement .
The arrow on the right side of the Jaw indicates the DC current direction of positive current flow (from positive to negative).
1*Multimeter (770HC-APP)_
1*Manual
1*Temperature Test Probe
1*Carrying bag
1*Test Lead
1*Adapter(605A)
