Parameters

Dimensions: 690*550*480mm

Power supply: 220V 50/60HZ

Effective power: 3200W

Machine weight: 42KG

Nozzles: 5pcs

Pre-heating size: Max 450*550mm

Heating zones: 3 zones

Heating: Hot Air

Bottom hot air heating: 800W

Bottom infrared heating: 2800W

Upper hot air heating: 800W

Performance indicators and specifications

This rework station is suitable for repairing circuit boards such as notebook computer motherboards, desktop computer motherboards, and XBOX-360.

A total of three temperature zones are independently heated, the upper part is heated by 1000W of hot air, the lower part is heated by 1000W, and the lower part is preheated by 3200W infrared heating.

Using touch screen as man-machine interface, PLC precise control, real-time display of temperature curve, heating temperature and heating time of the three temperature zones are displayed on the touch screen, can accurately control the preheating and desoldering temperature, the temperature error is about 1 degree.

Movable heating head, easy to operate.

8 sections of heating + 8 sections of constant temperature control, the standard configuration can store 20 sets of temperature curves. It can be expanded as needed.

The standard configuration of T6 only needs a period of heating and a period of constant temperature to achieve the ideal welding effect, which is simple and reliable.

The standard configuration of T6 only needs two sets of temperature curves, one set for welding lead-free boards, and one set for welding lead-free boards, which can easily achieve almost 100% welding success rate.

The high-power cross flow fan cools the circuit board quickly.

It has an audible alarm function when the desoldering is completed.

The vacuum suction pen sucks the BGA chip.

The temperature control is accurate, and the welding area will not sink locally.

The infrared heating plate can individually control heating.

The optical alignment interface is reserved, and the optical alignment machine can be selected as required.

The lower part of this rework station is a preheating station, which is used to preheat the PCB board to ensure that the board is not deformed. It can preheat the circuit board of 450*550mm.