Welcome to our HENKEL - LOCTITE Genuine Threadlockers / Rertainers / Sealants auction

 

Thinking about our clients, we came up with the idea of ​​creating something tailored to every pocket. 

In difficult times in which we are, with all prices constantly rising, we decided to create an auction with 5ml / 10ml bottles or tubes supplemented with original glue at very low prices. 

(Pictures of bottles are taken from 5ml size - 10ml size can be seen on AA 326)

Not everyone needs a medium-sized, large bottle of glue. A lot of the time we want to fix a little thing and we really need a few drops. With our solution, you can do it for a fraction of the price.

Anything from small to medium job

 

We offer only the original Henkel adhesives/sealants - Loctite as shown in the photo. 

They are not Chinese replicas, which are very dangerous and are on 90% of eBay auctions, those sellers often put them at a very low price and with original photo BEWARE. CHECK THE PEOPLE COMMENTS/FEEDBACK BEFORE YOU BUY - THIS IS NOT A GREAT PRICE PURCHASE AS YOU MIGHT THINK - you buying something that might cost you either health or loads of monies if incorrect sealant is applied.

 

Below, a careful description from the manufacturer, so that you can familiarize yourself with the products that we offer. 

Thank you and we invite you to shop in our store.

Loctite 222

Threadlocking Adhesive - low strength. Easy disassembly. Suitable for all metal threaded assemblies.

LOCTITE 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws

Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses

Especially suited to small thread sizes

Permits disassembly with hand tools

Size : 5ml/10ml

Loctite 2400

Threadlocking Adhesive - medium strength. No labelling. Suitable for all metal threaded assemblies.

LOCTITE 2400 is a medium threadlocker formulated to secure and seal bolts, nuts and studs to prevent loosening due to vibration. It works on all metals and passive substrates. Slight contamination by industrial oils, corrosion prevention oils and cutting fluids is tolerated. LOCTITE 2400 carries no hazard symbols, risk or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive toxins.

No hazard symbols, no risk phrases & no safety phrases

WRAS Approval (BS 6920): 1104507

Permits regular disassembly

Prevents loosening on vibrating assemblies e.g. pumps, gear boxes or presses

Improved cure strength on zinc-flake coated steel

Improved cure speed on inactive substrates

Thread size = M36

Size : 5ml/10ml

Loctite 242

Medium strength, medium viscosity thixotropic threadlocking adhesive for metal thread sizes up to M36.

LOCTITE 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities. The product provides quick fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools.

Medium strength

Medium viscosity

Quick fixture time

Thixotropic to reduce adhesive migration

Size : 5ml/10ml

Loctite 243

LOCTITE 243 is a medium strength blue threadlocking adhesive that seals and secures metal nuts and bolts to prevent loosening due to shock and vibration.

LOCTITE 243 is a general purpose threadlocker that provides a medium strength bond. LOCTITE 243 works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g., motor oils, corrosion prevention oils and cutting fluid.

Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses

Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)

Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids

Permits disassembly with hand tools for servicing

Size : 5ml/10ml

Loctite 262

Medium/high strength, thixotropic methacrylate-based threadlocking adhesive which fluoresces under UV light to allow monitoring.

LOCTITE® 262 is a red, general purpose, medium to high strength, thixotropic methacrylate-based adhesive. Steel fixture time is 15 min, brass 8 min and stainless steel 180 min. It fluoresces under UV light to allow monitoring. Ideal for applications where any migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners.

Resistant to vibration

Fluoresces to allow quality control and inspection

Tolerates slight contaminations of industrial oils

Suitable for all metal fasteners

Med/high strength, general purpose

Thixotropic/low viscosity

Size : 5ml/10ml

Loctite 263

Red, high strength, high viscosity methacrylate-based threadlocking adhesive, suited to large threads. Fluoresces to allow monitoring.

LOCTITE 263 is a red, high strength, high viscosity, methacrylate-based threadlocking adhesive. It has a fixture time on steel of 30 min, brass 25 min and stainless steel 270 min making it deal for applications where migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suited to large threads. Fluoresces to allow monitoring.

High viscosity

Prevents unwanted movement, loosening, leaks and corrosion

Resists vibration

Breakaway torque on M10 bolts of 32 Nm

Suited to large threads

High strength

Size : 5ml/10ml

Loctite 270

Threadlocking Adhesive - high strength. Permanent locking. Suitable for all metal threaded assemblies.

LOCTITE 270 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Can be disassembled by heating to 300°C.

High-strength general threadlocker for maximum efficacy

Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses

Proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids

Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)

Permits disassembly with hand tools

Can be disassembled by heating to 300°C

Size : 5ml/10ml

Loctite 2701

High strength, low viscosity, green, methacrylate-based threadlocking adhesive which fluoresces under UV light to allow monitoring.

LOCTITE 2701 is a green, low viscosity, methacrylate-based threadlocking adhesive with high strength, especially for chromated surfaces. Steel fixture time of 10 min, brass 4 min and stainless steel 25 min. Tolerates slight contaminations of industrial oils. Suitable for all metal fasteners. Fluoresces under UV light.

Low viscosity

Fluoresces to allow quality control and inspection

High strength, especially for chromated surfaces

Prevents unwanted movement, loosening, leaks and corrosion

Resists vibration

Seals threads - allows through-hole tapping

Size : 5ml/10ml

Loctite 271

 Size : 5ml/10ml

Loctite 272

Red, high strength, medium viscosity, methacrylate-based threadlocking adhesive with high temperature resistance.
LOCTITE 272 is a red, medium viscosity, methacrylate-based threadlocking adhesive with high strength. With a fixture time on steel of 10 min, brass 5 min and stainless steel 15 min, it is ideal for applications where any migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners. It has a breakaway torque on M10 bolts of 23 Nm.

Loctite 275

 Size : 5ml/10ml

Loctite 278

Loctite 290

LOCTITE 290 is a medium/high strength, wicking grade threadlocking adhesive that is ideal for locking preassembled fasteners.
LOCTITE 290 is a liquid medium/high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosities in welds, castings and powdered metal parts.

Loctite AA 326

LOCTITE AA 326 is a yellow to amber, 2-step, no mix medium viscosity (thixotropic) structural acrylic and adhesive suitable for magnet bonding.
LOCTITE® AA 326 is a general-purpose structural adhesive for fast cure and high shear strength. Among other applications, the 2-step acrylic is used in magnet bonding in electric motors. It has good adhesion to different types of ferrites, a fixture time of less than 3 minutes and a high shear strength of 15 N/mm². It can be used in temperatures up to +120°C. Requires LOCTITE SF 7649 to activate.

Loctite 542

Thread Sealant - medium strength. For fine threads in hydraulic, pneumatic and general fittings. Fast curing.
LOCTITE® 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Loctite 586

Thread Sealant - high strength. Especially suitable for copper and brass fittings. Slow curing.
LOCTITE® 586 is a high-strength sealant for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures slowly and provide a high-pressure seal for metal pipes and fittings. It exhibits excellent characteristics on brass and is also suitable for copper. It will not creep, shrink or block systems by shredding.

Loctite 601

High strength, dimethacrylate ester-based retaining compound with medium cure speed and low viscosity; suitable for filling small gaps.
LOCTITE® 601 is a green, anaerobic, low viscosity, medium cure speed, dimethacrylate ester-based retaining compound suitable for a max. diametrical clearance of 0.1 mm. It is a high strength product for applications that require a permanent bond. Fixture time on steel is 25 min and service temperature from -55ºC to +150ºC. Fluorescence allows product presence to be monitored.

Loctite 603

Retaining Compound - high strength. Ideal for bearings. For use on close-fitting cylindrical parts. High oil tolerance.
LOCTITE® 603 is a high-strength retaining compound. Designed for the bonding of cylindrical fitting parts, especially for sintered bearings and also where consistently clean surfaces cannot be assured. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It has a high oil tolerance.

Loctite 609

High strength methacrylate ester acrylic retaining compound designed for the bonding of cylindrical fitting parts.
LOCTITE® 609 is a green, high strength methacrylate ester acrylic retaining compound designed for the bonding of cylindrical fitting parts. The product cures in the absence of air between close fitting metal surfaces. Typical applications include rotor to shafts in fractional and subfractional horsepower motors. Locks bushings and sleeves in housings on shafts. Augments press fits.

Loctite 620

Retaining Compound - high strength. High temperature resistance.

LOCTITE 620 is designed for the bonding of cylindrical fitting parts. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Typical applications include locating pins in radiator assemblies, sleeves in pump housings and bearings in auto transmissions. Particularly suitable for applications where temperature resistance up to 200°C is required.

Your benefits

High temperature resistance

Ideal for retaining pins in radiator assemblies, sleeves in pump housings and bearings in auto transmissions

Size : 5ml/10ml

Loctite 638

LOCTITE 638 is a high strength, fast curing, general purpose retaining compound.
LOCTITE 638 is designed for the bonding of cylindrical fitting parts, particularly with narrow bond gaps approaching 0.25 mm. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It not only works on active metals but also on passive substrates, exhibiting robust cure performance. The product offers high-temperature performance and good oil tolerance, and tolerates minor surface contaminants.

Loctite 641

Retaining Compound - medium strength. If disassembly is required. Ideal for parts that need subsequent dismantling.
LOCTITE® 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings.

Loctite 648

LOCTITE 648 is a low viscosity, high strength retaining compound with high temperature resistance. Ideal for retention of parts with a clearance or interference fit.
LOCTITE® 648 is designed for the bonding of cylindrical fitting parts. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It exhibits a robust curing performance. The product also works on passive substrates and offers high-temperature performance and good oil tolerance.

Loctite 680

High strength, methacrylate ester acrylic liquid designed for the bonding of cylindrical fitting parts, particularly where low viscosity is required.
LOCTITE® 680 is a green, high strength, methacrylate ester acrylic liquid designed for the bonding of cylindrical fitting parts, particularly where low viscosity is required. The product prevents loosening and leakage from shock and vibration. It provides robust curing performance. It works on active metals (e.g. mild steel) and on passive substrates (e.g. stainless steel and plated surfaces).

Loctite 510

LOCTITE 510 is a high temperature and chemical resistant gasketing product that is ideal for use on rigid flanges.
LOCTITE® 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and motor casings. It ensures an instant, low-pressure seal. The product increases the torque capacity of assembled flanges.
Size : 10ml


LOCTITE 515

Gasketing product for machined metal flanges. Medium strength. For gaps up to 0.25 mm. 30 min fixture time.

LOCTITE 515 is a medium strength (6 N/mm² tensile shear strength), medium cure speed, methacrylate-based industrial gasketing product designed for machined, rigid metal flanges. The product, which cures anaerobically, is suitable for gaps up to 0.25 mm. It is used typically as a form-in-place product for pumps, thermostats, compressors, transmission housings and axle covers.

Your benefits

Ideal for machined metal componentsPerfect seal between components
For gaps up to 0.25 mm
Size: 10ml


LOCTITE 518

Medium-strength, general purpose gasketing product - excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges.

LOCTITE 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. Fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service.

Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and engine housings.

Size : 10ml


LOCTITE 572 

Medium strength thread sealant for coarse threads on metal pipes and fittings. 

Slow curing to allow adjustment after sealant application.

LOCTITE 572 is a white to off-white, medium strength, methacrylate-based thread sealant for metal pipes and fittings. 

Suitable for coarse threads, it offers a breakaway torque of 7 Nm. 

Slow curing attributes allow users to adjust the alignment of fittings. 

Suitable for thread sizes up to M80, it is thixotropic to reduce migration after application.

Your benefits

  • Slow curing to allow fittings adjustment
  • Designed for metal pipes and fittings
  • Suitable for coarse threads 
Size : 10ml

LOCTITE 573


Gasketing Product - slow curing. Ideal for use on machined and rigid metal flanges.
LOCTITE® 573 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. Typically used as a form-in-place gasket on rigid flanged connections, e.g. transmission and engine casings, etc. It is the ideal product for part assembly jobs extending over several hours. The nature of LOCTITE 573 reduces the migration of liquid product after application to the part.
  • Typically used as a form-in-place gasket on rigid flanged connections
  • Ideal for sealing large, rigid metal flanges or flanges where assembly may take up to several hours
Size : 10ml

LOCTITE 574

Gasketing Product - general purpose. Ideal for use on machined and rigid metal flanges. LOCTITE 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.

Your benefits

  • Ideal for use on rigid metal parts, e.g. cast iron components and pump housings
  • High oil resistance 
  • Excellent water and glycol resistance
Size : 10ml

LOCTITE 577 

Thread Sealant - medium strength. General purpose. For overhead applications and fast application at low temperatures. Slow curing.

LOCTITE 577 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product provides an instant, low-pressure seal for metal pipes and fittings. It will not creep, shrink or block systems by shredding. Suitable for fast application at low temperatures. It has excellent chemical and thermal resistance and offers less migration of liquid product after application to the part.

Your benefits

  • The all-rounder - general purpose liquid thread sealant for sealing metal thread
  • Suitable for metal threads only
  • Instant low pressure seal
  • Resistant to fuel, oil, coolants and hydraulic fluids
  • Locks connection against vibration-induced loosening
Size : 10ml

LOCTITE 660

Retaining Compound - high strength. Gap filling. For repair of worn-out seats, keys, splines, bearings or tapers without remachining.

LOCTITE 660 is designed for the bonding of cylindrical fitting parts, particularly where bond gaps occurs such with worn parts, without the need for remachining. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. This product exhibits excellent gap cure characteristics and is also suitable for retaining shims.

Your benefits

  • Ideal for repairing worn parts without remachining
  • Enables re-use of worn bearing seats, keys, splines or tapers
  • Suitable for retaining shims 
Size : 10ml