Payment Policy Shipping Policy Return Policy FAQ About Us |
Dixie Musical Horn 5 Black Plastic Trumpet Air Horn For Car Truck Train Lorry
Product Information: This musical air horn plays the distinctively American tune “DIXIE”, also known as Dixie’s Land, made popular by the American TV series The Dukes of Hazzard. The Kit comes with five strong black ABS trumpets, a 12V heavy duty compressor, hose, relay ,button,wiring,and mounting hardware. This kit has all the bells and whistles you would expect, and generates immediate attention. Features: - Dixie Musical Air Horn Musical Air Horn (Black)
- Music: Dixie also known as Dixie’s Land and I Wish I Was in Dixie, made popular on the american television series The Dukes of Hazzard
- 12V Heavy Duty Air Compressor
- Strong and Durable Plastic Trumpets and Housing
- 4-PIN 12V/30A Relay
- 3/8″ OD Air Hose
- Mounting Hardware Included
- Horn Size 6″, 8″, 8-½”,10″,11″ Long x 3-½” Diameter
Included in this kit: - 1 x 5 Trumpets Air Horn
- 1 x Compressor
- 1 x Hose
- 1 x Horn Button
- 1 x Relay
- 1 x Wiring Kit
- 1 x Package of Fittings
Specification: - Trumpets Size:7"/8"/8.5"/10"/11"x3-½"(168/210/220/265/280mmx65mm)
- Package Size:20"x 8"x 3.5"(51.5x21x9cm)
- Gross Weight:4.4 lb
- Volt:DC 12V
- Current:20.0A
- Sound Level:130dB
- Operation Air:15-22 PSI(0.1Mpa-0.15Mpa)
- Music Type:Dixieland
- Material:Black ABS Plastic
- Melody sounds like "Dixie" horn from The Dukes of Hazzard
SAFETY INSTRUCTIONS: - Make sure you never attempt to disassemble this horn kit’s electrical components.
- Never use your bare hands to any part of the compressor immediately after or during use.
- Avoid operating this product in an area with risk of falling or submergence into a liquid (water).
- Do not reach out for or touch any component that has fallen or been submerged into water.
- Make sure you set up in areas with good ventilation.
- Never sound the air horn anywhere near your ear(s) or that of another person.
- Make sure your battery ground is detached before getting your installation started.
- Employ equipment for eye protection during drilling operations.
- The specific voltage requirement for this horn kit is 12 volt DC, therefore installation must be done to a DC power source of 12 volts.
Installation Tips HORN MOUNTING: - Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of the vehicle so as to provide a firm platform which will help protect the horn from damage due to excessive shaking. Do not attach the horn to any plastic or other flexible material.
- Using the bracket as a guide estimate and mark the positions for the holes and then perforate to size using a drill.
- Use the provided mounting hardware to fasten the horn.
COMPRESSOR MOUNTING: - The ideal location for the compressor to be installed is a dry area inside your engine compartment where it will be safe from exhaust and engine manifold heat.
- To make the compressor firm and secure, drill a hole of 3/16". IMPORTANT: The compressor must be mounted vertically (with air exhaust port facing downward).
- Install the bolt’s head into the compressor housing’s slot. Tighten the compressor firmly to the vehicle with the provided lock washer and nut.
AIR LINE INSTALLATION: - Connect one side of the airline to the compressor’s air exhaust port and the other side to the trumpet's barbed fitting.
- Do not make any sharp bends or kinks in the tubing which could alter the sound of the horn or even restrict airflow.
- IMPORTANT: Airlines are sometimes already pre-installed. In such situation, ensure that they are inserted entirely into the fittings on the trumpet and compressor.
ELECTRICAL CONNECTIONS (FACTORY HORN SWITCH): - For vehicles with a two-terminal factory horn, transfer the wires to the compressor’s terminals. If the horn doesn’t sound even if the compressor motor turns on, simply reverse the wires.
- For vehicles with one-terminal factory horns, make sure you transfer the wire to the compressor’s positive (+) terminal. The negative (-) terminal uses a 16-gauge wire or heavier to connect to ground.
ELECTRICAL CONNECTIONS (NEW HORN BUTTON): - In a dry location, install the relay provided making sure that terminals face downwards near the horn.
- Using a 16-gauge wire or heavier, connect PIN 87 of the relay to the positive (+) terminal of the compressor.
- Connect PIN 85 of the relay to the horn button (not provided). The other horn button terminal is attached to any rust and paint free metal to ground. Connect using an 18-gauge wire or heavier.
- Connect PIN 30 and 86 of the relay to the battery, alternator or other positive (+) of 12-volts. Make sure the wire used is a 16-gauge wire or heavier. Use a 20A fuse (not provided) to protect the electrical circuit.
Maintenance: - Always keep the appearance of the horn clean and all wiring reliable.
- Regularly check and tighten the fixing screws of horn and bracket to ensure reliable grounding.
- The fixing method of trumpet has great influence on its pronunciation. In order to make the sound of the horn normal, the horn can not be rigidly installed, so it is fixed on the buffer bracket, that is, between the horn and the fixed bracket, a leaf spring or rubber pad should be installed.
- Check the output voltage of generator regularly. If the voltage is too high, the horn contact will be burned. If the voltage is too low (lower than the rated voltage of the horn), the horn will make abnormal sound.
- When washing the car, it is not allowed to wash the trumpet directly with water, so as to prevent the water from entering the trumpet and the trumpet from sounding.
- When repairing the horn, pay attention to the position of each metal pad and insulation pad, and do not install them wrong.
- The continuous pronunciation of the horn shall not exceed 10s to avoid damaging the horn.
- Do not put all kinds of foreign matters into the horn to avoid abnormal sound.
Any payment methods accepted by ebay will be acceptale.
Package will be shipped out within 24 hours (after payment) if there's no problem with the shipping address, or placing wrong order, or we contacted buyer to confirm the compatibilities.
It will takes 2-7 days in transit, according to Different address.
Packages will shipped out by the carriers:
* USPS:United States Postal Service
* FedEx：FedEx Express
* UPS:United Parcel Service
* DHL:DHL Express
* Other：Other carriers.
30-Day Free Return.
Any problem caused by seller, we will provide a 30 days free return.
1.To avoid you buying the wrong parts, please check the Fitment chart above before placing an order.
2.You could choose a vehicle from the "My Garage" list. Or Enter your vehicle's details with Year / Make / Model / Trim / Engine. OrContact us for double check.
3. We try to deliver a better online shopping experiencefor our customers. If you have any problem, please feel free to contact us.
|
