DESCRIPTION

Features:

*The meter requires that the device under test must have a neutral line. Otherwise, it cannot measure the voltage, current and power of the device.

The application monitors energy consumption in real time KWh. voltage, current and power and also monitors the operating status of the equipment

*Electricity statistics

You can view hourly, daily, monthly, yearly and total power consumption KWh. in the application

Monitor the percentage of electricity used by the application

*You can open the application and monitor the percentage of electricity usage.

Automation, which allows to set up a scenario for this device to work with other tuya devices.

*Setting up automation for the device under test, the For example, if the power or current exceeds that value, then other tuya devices start working.

*Safety and ease of installation

For safety reasons, it is not necessary to connect the wires, just put them in the clamps and measure.

Specifications:

Wi-Fi • 802.11 B/G/N20/N40@2.4GHz

RF Characteristics • Operating frequency: 2.4GHz

• Internal antenna

Physical Specifications

Operating Voltage • 90~250 Vac 50/60 Hz

Calibrated Metering Accuracy • ≤ 100W Within ±2W

• >100W Within ±2%

Reporting Cycle • Every 2 seconds

 Din Rail • 35mm

Clamp diameter

• 200A (optional): 21.1mm

Clamp length • 1m

Operating environment •Temperature:-20 ℃~+55 ℃ 

•Humidity: ≤ 90% non-condensing

Dimension • 51.5(L) x 46(W) x 23(H) mm

Certification • CE

Package Contents:

1*Energy meter 200A with 2 current transformer clamp

Note:

1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

2. Please allow slight manual measurement deviation for the data.