Anti-thermal imager,poncho protection against thermal imagers and drones pixel color
WE DO NOT USE Foil IN PRODUCTION!! PRICES FROM THE MANUFACTURER!!!! Video tests were done in the heat at lunchtime, on a top-end device AGM Sidewinder TM50-640 (08216) The cost of which is more than 150 thousand in all filters ✅
Rules of use:
prolonged direct contact of the cape with sources of thermal radiation (human body, equipment, technology, etc.);
time of acceptance of the temperature layer of the environment (for example, when transferring heat to cold, the cape must be cooled);
“Break the silhouette” during use. Avoid creating artificial rectangular shapes or pencil lines.
Make sure there is a layer of air between the cape and the protected object. This significantly increases the effectiveness of thermal masking and allows you to extend the period of masking of an object;
do not reveal the source of fire, even with a large gap between the fire and the awning;
protect from cuts, friction, punctures; to fix the cape, use only standard eyelets, do not cut additional holes in it, do not pull sharp pins, sticks, etc.;
Beware of contamination with active chemicals (acids, alkalis, solvents). Do not wash the cape in washing machines;
do not use the cape as a bag or burden
Real protection from drones with thermal imagers, like a poncho = worn on yourself, or stretched like a screen in front, like a roof on top. > 150cm X 280cm (140cm = perfectly covers the legs from below) advantages: Attention! This is not an invisibility cloak, but protection from a thermal imager. Concealing temperature. Modern teplyaks have 4 modes and can simultaneously apply both PNB and teplyak waves to the screen and... Then all the trees and stones are visible on the screen. Therefore, task No. 1 = blur the silhouette of the human body. And this poncho copes with this task too.
That is, do not expect that the silhouette of the poncho will not be visible at all (look at the last photos). First of all, there will be no thermal glow of the person’s torso, and secondly, the silhouette of the torso will be hidden in the landscape. three balls are not tightly connected + the design of the poncho itself ensures air movement).
Therefore, the design does not fit like clothing, but like a poncho.
* complete protection from rain;
* eyelets at the corners = can be stretched and fixed as a screen from above/vertically;
* original multicam ornament = perfect camouflage for spring, summer, autumn;
* strong to termination. Unlike regular foil, which comes out at the seams;
* takes up little space when folded;
* several ponchos can be connected along the edge into one awning (last photo)
Disadvantages = a bit of friction noise.
Optimal protection against drones with greenhouses for sentries, as a protection screen for overnight stays, PPD, etc.
Be sure to wear this poncho = over your helmet and body armor with BC.
We send by new mail with cash on delivery, evaluate the quality - then make the final decision.💛💙