Dieses Angebot beinhaltet:

1 PC  ACT080-S075A001 Servo Motor  Fram  80*80MM

1 PC Servo Motor Driver A3A-L20A-WABF

English:

3M Servo Encoder Extension Cable(Optical Encoder)

3M Servo Motor Extension Cable(Optical Encoder)

1,5M Servo Host Control Cable(Optical Encoder)

Deutch:

3M Servo Encoder Verlängerungskabel (optischer Encoder)

3M Servomotor Verlängerungskabel (optischer Encoder)

1,5M Servo Host Steuerkabel (optischer Encoder)

If you need installation videos or more instructions, please contact us.

ELECTRICAL PARAMETER: 

ACT040-Q010A003

Spannung	Rated Voltage	220 V
Leistung	Rated power	100W
Rotorpol Paris	Rotor Pole Paris	5P
Nenndrehmoment	Rated Torque	0.32N.M
Spitzendrehmoment	Peak  Torque	0.96 N.M
Drehrate	Rated Speed	3000RPM
Höchstgeschwindigkeit	Max Speed	6000RPM
Nennstrom	Rated Current	1/A±10%
Spitzenstrom	Peak Current	3/A±10%
Drehmomentkonstante	Torque Constant	0.3N.M/A±10%
Gegen-EMK-Konstante	Back EMF Constant	17.5V/kRPM±10%
Widerstand	Resistance	14 ohm±10% AT 20℃
Induktivität	Inductance	10 mH±20% AT 1Khz,1Vrms
Rotorträgheit	Rotor Inertia	0.06[0.08]*10-4  KG.CM±10%
Radiallast zulassen	Allow Radial Load	68N
Axiale Belastung zulassen	Allow Axial Load	50N
Gewicht	weight	0.5[0.65]KG
Sicherheitsklasse	Safety Class	IP54
Isolationsklasse	Insulation Class	Class F
Isolationswiderstand	Insulation Resistance	>20MΩ/MIN  DC500V
Durchschlagsfestigkeit	Dielectric Strength	1500V A.C/1S/5MA
Drehrichtung	Rotation Direction	CCW
Vibrationsklasse	Vibration Class	Class A during rated operation

Driver 

A3C-L15A-RABN

Drive Model specifications

Model		L15	L20
Input power supply	Main power supply	Single phase 220VAC -15%~+10% 50/60Hz
Environment	Temperature Work	0℃～ 40℃ Storage ：-40℃～ 50℃
	Humidity Work	40% ～ 80%(No condensation) Storage ：Less than93%(No condensation)
	Atmospheric pressure	86kPa ～ 106 kPa
Protection grade	IP20
Control mode	Position, speed, torque, position/speed, speed/torque, position/torque
Digital input	4 programmable input terminals (optically isolated)
Digital output	4 programmable input terminals (optically isolated)
Encoder signal output	Signal types	A, B, Z differential output (none) Z signal collector open output RS485 communication reads the feedback encoder position
Location	Input frequency	A3C: Differential input ：≤500kHz（kpps）；Single-ended input ：≤200kHz（kpps）
	Instruction mode	A3C: Pulse + sign; Forward/reverse pulse; The orthogonal pulse(A/B)
	Electronic gear ratio	1～32767/1～32767
Speed	Analog command input	0~10VDC ，The input impedance10kΩ
	Command acceleration and deceleration	Parameter settings P-060/P-061
	Sources of instruction	Analog quantity, internal speed command
Torque	Analog command input	0～+10V，The input impedance 10kΩ
	The torque limit	Parameter settings P-065/P-066
	Sources of instruction	Analog quantity, internal torque instruction
Monitoring functions	Speed, current position, position deviation, motor torque, motor current, command pulse frequency, etc
Protection function	Over-speed, overvoltage, over-current, overload, brake anomaly, encoder anomaly, position error, command over-frequency, etc
Features	Velocity frequency response	≥1.6kHz
	Fluctuation of velocity	＜±0.03%(Load 0～100%）; ＜±0.02%(Power -15% ～ +10%)

 

ELECTRICAL PARAMETER: 

ACT080-S075A001

Spannung	Rated Voltage	220 V
Leistung	Rated power	0.75KW
Nenndrehmoment	Rated Torque	2.39N.M
Spitzendrehmoment	Peak  Torque	7.1 N.M
Drehrate	Rated Speed	3000RPM
Nennstrom	Rated Current	3/A±10%
Spitzenstrom	Peak Current	9/A±10%
Gegen-EMK-Konstante	Back EMF Constant	48V/kRPM
Drehmomentkonstante	Torque Constant	0.8N.M/A±10%
Gegen-EMK-Konstante	Back EMF Constant	33.2V/kRPM±10%
Widerstand	Resistance	5.9ohm±10% AT 20℃
Induktivität	Inductance	6.4mH±20% AT 1Khz,1Vrms
Elektrische Zeitkonstante	Electricaltime-constant	2.2ms
Rotorträgheit	Rotor Inertia	1.82*10-4  KG.CM±10%
Gewicht	weight	2.9KG
Sicherheitsklasse	Safety Class	IP65
Isolationsklasse	Insulation Class	Class F
Linie	Line	2500

 

Driver 

A3A-L20A-WABF