Breakout Board for ESP32 / ESP32-S3 WROVER WROOM Terminal Block Shield Module

3.7V 3000mAh Lithium Polymer Rechargeable Battery 1S LiPo Battery  Built-in Protection Board for Meshtastic Devices, ESP32 Development Board, Electronic Devices 2 Pieces

About this item

  • Charging Method: The recommended charging current is 0.6A, the maximum does not exceed 1.5A. The discharge current is recommended 0.6A, and the maximum does not exceed 1.5A
  • Overcharge Protection: When charging the battery, when the voltage reaches the highest battery voltage (4.2V), the protection board will automatically power off and shut down, indicating that it will not continue to charge when fully charged, forms overcharge protection
  • Over-discharge Protection: When the battery is about to run out and the voltage is as low as 3.0V, the protection board will also be turned off and can no longer be discharged, forming an over-discharge protection effect
  • Short Circuit Protection: When an accidental short circuit occurs, the protection board will automatically shut down within a few milliseconds and will not be powered on again. Note that the cell is short-circuited (not through the protection board). The protection board will also fail due to continuous high current, or the components are heated and damaged
  • Widely Application: With JST 1.25 plug, these lithium polymer batteries can be used for development board whose plug is SH1.25-2, such as ESP32 LoRa V3, ESP32 LoRa V4, Wireless Tracker, Mesh Node T114, Mesh Node T096 and electronic devices
  • Note: The battery overcurrent protection is not a panacea, do not continue to charge and discharge the current and voltage with a large current beyond the range, otherwise the protection board will be damaged and invalid

Product description

3000mAh Battery
3000mAh Battery
3000mAh Battery

Parameters

Rated Capacity 3000mAh
Rated Energy 11.1Wh
Nominal Voltage 3.7V
Charge Limit Voltage 4.2V
Standard Charge Method Charging the battery initially with constant current at 0.2C and then with constant voltage at 4.2V till charge current declines to 0.02C
Max Charage Rate 0.5C
Max Discharage Rate 0.5C
Charging Temperature 0~+45℃
Discharging Temperature -10~+60℃

- All payments must be prepaid.

- Accept payment by Credit Card 、Debit Card、Apple Pay、Google Pay and PayPal.

- Payment must be received within 7 days after auctions ended. Unpaid dispute will be filed to eBay for the non payable bidders.

- We will ship all orders within 2 business day of payment.

- The shipment usually takes 1-5 business days (Saturday and Sunday excluded).

- If you need the item urgently, please contact us for detail before purchase.

- Local pick up is not available.

1.Our items come with our warranty.

2.Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part.

3.This product comes with 60-Day Money Back Guarantee.

4.We stand behind every product we sell. If you're not pleased with your purchase, we'll be happy to make an exchange or refund.

5.For all returned products, please contact us for the returning address.

Welcome to our store ! We supply many products including unmanned drone and accessories, camera & camcorder accessories and Consumer Electronics.High product quality, reasonable prices, excellent customer service and a reliable credit standing is our tenet.

Thank you for shopping at our eBay Store.

1.You will receive our positive feedback as soon as you pay for your item.
2. Your better comments will be an encouragement for us to offer the better quality and the better service in future.
3.If you are not satisfied with them, please contact us first via Ask a Question or via Contact Seller. Your messages will be answered within 1-2 business day. We shall try our best to solve your problem to your satisfaction.
PushAuction