Feature：
【Higher Sensitivity】Response within 3 seconds; Warm up in 6 seconds. 7 Adjustable Sensitivity;7.9 inch flexible sensing tip excellent sensor,with higher sensitivity(up to 0.14oz/yr.), It can continuously work for 50 hours with 4*AAA batteries power supplied.（Battery not included）
【Wide range of uses】detects all types of halogenated refrigerants
WJL-6000UV：
【Two-Color LED Light】The Freon tester comes with UV lamp + flashlight. UV lamp is used for a/c dye fluorescence, white light is suitable for illuminating dark and small places.
WJL-6000Pro：
【Two-Color LED Light】The Freon tester comes with UV lamp + flashlight. UV lamp is used for a/c dye fluorescence, white light is suitable for illuminating dark and small places.
【Upgraded Version of WJL-6000】WJL-6000Pro halogen leak detector is the upgraded version of the classic WJL-6000 with higher sensitivity. New upgraded LCD screen displays sensitivity level and refrigerant gas leakage level, even multiple alarm functions.
【Multi-Alarms】The audible and visual display alarms in the leakage tester can easily help you to locate where the leakage is. Once leaking gas is detected, the beep frequency will increase. The more gas leaked, the quickly the buzzer beeps, at the same time, the LCD screen displays the leakage level.
【Visualization of leakage levels】The new upgraded LCD screen will display the leakage level of refrigerant gas. In addition, adjust the sensitivity by pressing the button, LCD screen will display sensitivity level.
Notice:
This product works with all halogenated (including chlorine and fluorine) refrigerants. including but not limited to
CFCs e.g. R12,R11,R500,R503 etc...
HCFCs e.g. R22, R123, R124, R502 etc...
HFCs e.g. R134a,R404a,R125 etc...
Other mixtures can also be detected, e.g. AZ-50, HP62, MP39 etc. ...
Detection of ethylene oxide leaks from hospital disinfection devices (detection of halogen-containing gases)
Detection of SF-6 in high voltage circuit breakers
Detection of most gases containing chlorine, fluorine and bromine (halogen gases)
Detection of cleaning agents used in dry cleaning equipment, such as carbon tetrachloride
Detection of halon gases used in fire-fighting systems
Instructions:
1. switch on, you will hear an intermittent buzzer.
2. check the battery voltage level by observing the power indicator.
3. set the appropriate sensitivity or adjust the sensitivity at any time during operation. This setting does not interrupt detection.
4 Check for 6s after booting.
5 When halogen is detected, the buzzer will change to a "siren" like sound.
6. check the position of the siren and continue testing until the leak is confirmed.
Operating tips:
1. if no leak is found, set a higher sensitivity. In case of instability, set a lower sensitivity.
2. if the buzzer triggers a leak alarm and the sensor head stays on the detected part long enough, the circuit will compensate for it.
3. in windy areas, even large leaks are difficult to detect. In this case, it is best to shield the potential leakage area.
4. please note that the detector may trigger an alarm if the sensor head comes into contact with moisture and/or solvents. Therefore, contact with these objects should be avoided during leak detection.
Specifications:
Operating temperature: 0 ~ 52 ° C (30 ~ 125 ° F)
Battery life: Approx. 50 hours for normal use
Response time: Instantaneous
Fixed probe length: Approx. 200mm
Warm-up time: Approx. 6 seconds
Maximum sensitivity: 6gr/yr
Reset time: 2 to 10 seconds
Power supply: DC 6V/4 x AAA batteries (not included)
delivery:
Package contents:
1*Halogen leak detector
1*Handbag
1*Instruction manual
1*Light head (optional)
