Product description:
The voltage display is used for detecting the lithium battery of 1S-8S, and the voltage and the total voltage of each cell of the lithium battery are automatically detected. Reverse connection protection is supported.
It can let you know the working state of your battery anytime and anywhere, so that the battery will not be damaged due to overcharge or overcharge.
&No matter in flight or idle state, you can plug the electric display into the battery balance charging connector to know the battery power status.
No multimeter is necessary!
When the voltage is below the set, the buzzer rings and the red LED lights flash, and the setting is 3.3V, and press the button to change the voltage setting and automatically save the user's current setting.
Product parameters:
1. For 1S-8S lithium battery detection
2. Voltage detection accuracy: splusmn; 0.01V.
3. Group voltage display range: 0.5V to 4.5V
4. Display range of total voltage: 0.5V ~ 36V
5.1S test mode voltage range: 3.7V to 30V
6. Low voltage buzzer alarm mode 2S-8S
7. Alarm voltage setting range: OFF ~ 2.7 ~ 3.8V.
8. Dimensions:40 mm x 25 mm x 11 mm by weight:9 g
Quantity: 1 piece
Usage:
put the front side of the electric display upward (the side of the digital display), and insert the pin to yourself. Insert the white balance charging plug of the battery along the left most pin of the electric display. The electric display will immediately make two BB rings, and the screen will display the jump number. If there is no response, just plug the balance charging plug back in. There is a small button at the other end of the electric display to set the alarm voltage of the electric display.
The voltage display is used for detecting the lithium battery of 1S-8S, and the voltage and the total voltage of each cell of the lithium battery are automatically detected. Reverse connection protection is supported.
It can let you know the working state of your battery anytime and anywhere, so that the battery will not be damaged due to overcharge or overcharge.
&No matter in flight or idle state, you can plug the electric display into the battery balance charging connector to know the battery power status.
No multimeter is necessary!
When the voltage is below the set, the buzzer rings and the red LED lights flash, and the setting is 3.3V, and press the button to change the voltage setting and automatically save the user's current setting.
Product parameters:
1. For 1S-8S lithium battery detection
2. Voltage detection accuracy: splusmn; 0.01V.
3. Group voltage display range: 0.5V to 4.5V
4. Display range of total voltage: 0.5V ~ 36V
5.1S test mode voltage range: 3.7V to 30V
6. Low voltage buzzer alarm mode 2S-8S
7. Alarm voltage setting range: OFF ~ 2.7 ~ 3.8V.
8. Dimensions:40 mm x 25 mm x 11 mm by weight:9 g
Quantity: 1 piece
Usage:
put the front side of the electric display upward (the side of the digital display), and insert the pin to yourself. Insert the white balance charging plug of the battery along the left most pin of the electric display. The electric display will immediately make two BB rings, and the screen will display the jump number. If there is no response, just plug the balance charging plug back in. There is a small button at the other end of the electric display to set the alarm voltage of the electric display.
