Note: It can not activate a dead battery or repair a damaged battery. LITHIUM BATTERIES ARE NOT ALLOWED

Features:
All in One, Keep your battery charged and your car ready to go
Battery Charger automotive 6-Amp 12V Fully-Automatic Smart, It's smaller but delivers more power. It's the all-in-one solution battery charger, battery maintainer, trickle charger, plus battery desulfator. Charge or repair all 12V lead-acid automotive, marine, and deep-cycle batteries, including AGM, GEL, SLA, and Flooded in cars, trucks, SUVs, motorcycles, lawnmowers, boats, marine, etc.
 
Enjoy Precision Charging, Your car deserves the best
Using a backlit LCD, the battery charger automotive clearly and visibly shows an LCD screen displaying the charging status and battery status; An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
 
Restore your Battery, Don't let a dead battery ruin your plans
Built-in advanced battery REPAIR mode to help to recover old/idle batteries and extend battery life. Please use repair mode if the car battery charger cannot charge the battery. The high-frequency and low-frequency pulse technology has good repair and activation effects.

 
8 Charging Protection, Never get stranded again
The charging cable contains heat-resistant and oxidation-resistant copper wire, which is not easy to break. It has protection circuits such as overcharge/overvoltage/overcurrent/short circuit with functions such as reverse connection protection and Undervoltage protection.
 
Intelligent Memory
The Car Battery Charger mode has a memory function. After charging, it defaults to the state mode used before the last power failure. no complicated steps, just plug and charge.
Note: It can't jump start the car, only the battery charging function. Requires power connection
 
How to use:
Before charging:
Check your battery parameters is compatible to the charger.
When charging:
1.Connect the red clamp to the positive pole (+), black clamp to the negative pole (-).
2.Connect the charger with AC power source, the charger will start to operate.
3.Once the battery is fully charged, the battery bar on screen will in “FUL” status.
Charging completed:
Keep the charged status in 1-2 hours is highly recommended, Then, remove the charger.
 
Each time you press the "Mode" button, it switches in sequence from "Car - Start-Stop - Motorcycle - Repair"
1. 'Car' mode.Suitable for ordinary cars, various agricultural vehicles, trucks and various 12V lead-acid batteries.
2. 'Start-Stop' mode.Suitable for batteries with start-stop function and GEL/AGM/Wet batteries...
3. 'Motorcycle' mode.Suitable for various motorcycles, and various 12V lead-acid batteries.
It will enter trickle charge mode (floating charge) to maintain the voltage of the battery and keep the battery charged for a long time. Even if the screen shows OFF, it will monitor the voltage of the battery. Once the voltage drops below 12.5 volts, the charger will automatically turn on and charge it again to keep the voltage normal.
4. 'Repair' mode.If it has been idle for a long time, is old, and cannot be charged, you can choose the "Repair" mode to try to activate the battery.
 
Specifications:
Shell material: ABS + all-copper plug wire
Input voltage: AC 110 V-240V 50/60 Hz
Input power: AC-150 W
Output voltage: DC13.8-15.5V
Output current: 12V 8A± 0.5A
Working Temperature: -10 ~ 45 ° C (14 ~ 113 ° F)
Dimension:180*85*60mm
Input/output cable length: 90cm

Package Included:
1 X 12V Pulse Repair LCD Charger (UK Plug)

Note: 
1.It can not activate a dead battery or repair a damaged battery. LITHIUM BATTERIES ARE NOT ALLOWED
2.It can't jump start the car, only the battery charging function. Requires power connection