AUTOOL CT200 Ultrasonic Fuel Injector Cleaner Tester Nozzle Flushing 6-Cylinders
CT200 Injector cleaning and testing machine is designed with wide voltage technology and is suitable for 110V and 220V voltage.It is combined with ultrasonic cleaning technology and microprocessor hydraulic control cleaning detection technology. Fuel pump oil supply simulates low, medium and high engine conditions, cleaning and testing the fuel injectors of the automobile; ultrasonic cleaning can simultaneously clean multiple injectors, which can effectively and completely remove carbon deposit for the automobiles injectors.
FUNCTIONS
  • Ultrasonic Cleaning: It sends signals to the injectors through the pulse signal line, using the cleaning fluid with the ultrasonic vibration so as to completely remove the carbon and impurities inside the injectors.
  • Idle Speed Test (0-20ms): Simulate the engine idling speed and test the state of the fuel injector.
  • Medium Speed Test (0-7.5ms): simulate the engine running at medium speed and test the state of the fuel injector.
  • High-Speed Test (0-4ms): Simulate the high-speed performance of the engine and test the state of the fuel injector.
  • Acceleration Test: Simulate the acceleration state of the car and test the performance of the fuel injector.
  • Shift Speed Test: Simulate the shifting state of the car and test the working performance of the fuel injector.
  • Leakage Test: Test the sealing condition of the fuel injector.
  • Idle Dpeed Sprayability Test: Simulate the engine idling state and test the spraying performance of the fuel injector.
  • Medium Speed Sprayability Test: Simulate the engine medium-speed state and test the spraying performance of the fuel injector.
  • High-Speed Sprayability Test: Simulate the high-speed state of the engine and test the spraying performance of the fuel injector.
  • Reverse Flush: Reverse flush is a way to clean the injectors with the test liquid flowing from the outlet to the inlet of the injector. Reverse flush may remove the dirt inside the injector or the injector Strainer (Only for the top fuel supply injector).
  • No-Disassembly Cleaning: Direct cleaning without disassembling the injectors, this function is an additional function, which requires special adapters.
Ultrasonic Cleaning
Ultrasonic Wave Injector Cleaner and Tester works by sending an ultrasonic vibration signal to the injector nozzle through the pulse signal line, which makes the stubborn carbon deposit jitter strongly and removes more thoroughly.
Reverse Cleaning & ON-Vehicle Cleaning
Fuel Injector Cleaner & Tester is with English Panel. We can clean and test both petrol car and motorcycle injector with this machine. (motorcycle support HONDA YAMAHA SUZUKI SANYANG only)
Wide Range of Applications
Automotive Fuel Cleaning Tester Supports most of the Cars and Motorcycles among the market.
Multi-Progress
6 injectors can be tested and cleaned at one time.
Applicable Voltage
CT200 Fuel Injector Cleaner Tester Support 110V or 220V power input.
Humanization Control Panel
CT200 Injector Cleaner Tester design with HD color display, makes the operation clear and easy to read.
Specifications
  • Power Supply:110/220V
  • Main unit dimensions:405*380*430MM
  • Package weight:17.89KG
  • Package dimensions:485*465*490MM
  • Power of Ultrasonic Cleaning:70W
  • Frequency of Ultrasonic
  • Cleaning:28KHZ±0.5KHZ
Packing List
  • 1pcs X CT200 Petrol Car Injector Tester Main Unit
  • 2pcs X Valve (for discharging fluid from machine tank)
  • 6pcs X Cleaning connector
  • 6pcs X Sealing ring
  • 6pcs X Washer fittings
  • 5pcs X Plugs
  • 1pcs X Ultrasonic cleaning bracket
  • 1pcs X Ultrasonic cleaning cover
  • 1pcs X Power cable
  • 1pcs X Funnel
  • 1pcs X Oil separator
  • 2pcs X Pulse signal cable
  • 2pcs X Fixing bolt
  • 1pcs X Manual(English)
  • 1pcs X Packing Box
Operation Steps
  • Ultrasonic Cleaning:
  • Step 1: Pour in the detergent andplace the fuel injector inthe ultrasonic cleaner.
  • Step 2: Connect the pulse signal wire &.select the ultrasonic cleaningfunction to start working.
  • Fuel Injector Testing:
  • Step 1: Pour in the test liquid, install theuel injector to the fuel distributorand fix it to the main unit by bolts.
  • Step 2: Test if the fuelinjector iseaking or blocked underdifferent functions.
How to Work ?
  1. Clean injector's outside with gasoline or cleaning liquid before open machine
  2. Putting injectors in ultrasonic bathtub after the outside of injector are free of dirt.
  3. Turn on ultrasonic system，pulsed allowing the ultrasonic energy to dislodge any particles even build-up inside the injectors.
  4. Fixed injectors on main machine.
  5. Testing injectors for resistance, shorts, and current draw.
  6. Performing leak test, spray pattern, and flow rate testing on flow bench.
  7. The injectors are now returned to the flow bench for retesting of all functions.
1. We accept PayPal only.

2. Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) payment can be accepted ONLY through PayPal (You don't need a PayPal account)!

3. Other payment methods (Bank transfer, Cheque, etc.) are NOT acceptable !

4. Please make the payment within 3 days.

1. We ship to WORLDWIDE
2. Item will be shipped out within 1-2 working days (except weekends and holidays) after the payment is cleared or received.
 
3. We will send item to your Confirmed Shipping Address in Paypal only.Please confirm your order and address before you bid or pay the item.
 
4. Usually the standard service delivery takes 15-20 working days (except weekends and holidays),If you don't receive the item in time, please contact us freely, we'll try our best to solve the delivery problem.
 
5.International Buyers Please Note:
1) Please check with your country customs office to determine what these additional costs will be prior to bidding / buying.
2) It's the buyer's responsibility to complete clearance when parcel reached your Customs. We are Not responsible for buyers's local taxes, please consult local Customs for Tax Details. Customs rates vary from country to country, please understand.
 
6. If your package delayed few days, due to any unexpected factor, please wait patiently. Your kindly understanding and great patience would be highly appreciated!
 
7. Any further queries, please don't hesitate to email us. Thank you.
1. Please do not hesitate to leave us your 5 Star★★★★★ of DSR positive feedback if you are satisfaction with our products ,delivery or services .
 
2. If you have any questions or unsatisfied with your purchase, please email us first to get a better solution before you leave a neutral or negative feedback, we work hard to make sure every customer 100% satisfied and resolve anyproblem for you.
Thank you for your kindness.
 
3. Defective products may be returned for repair up to 1 year from the purchase date. Repairs will be processed through the manufacturer, we will assist in the repair procedure in any way we can to expedite the process.
We are reliable supplier to both wholesalers and retail sellers.And we are a professional Authorized dealers of AUTOOL Warranty For 3 years，Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!
 
We supply many products on Automobile consumer. We have OBDII cars / Light Trucks / Heavy Duty Truck's , Battery Tester, Fuel Injector Cleaner Machine , Smoke Leak Detector Machine, Digital Circuit Tester, lgnition Spark Tester , Engine Timing Tool, and much more others products.
1. If you have any further queries, you can feel free to email me via email or eBay message. Thank you.
2.Please email us first before giving negative feedback or opening a case. Wish we can solve the problem peacefully.
3. Much appreciated if you could leave us positive feedback with five stars.
4. We will reply you within 12 hours and do our best solve the problem with you （Except on Weekends and Holidays）
Work time:Monday to Friday GMT8 (9:00am-18:00 PM)
PushAuction