Valdus Mini Air Compressor Portable Tire Inflator USB Rechargeable Mini Air Inflator Electric Tire Pump with 2000mAh Lithium Battery Work for 10 Minutes (Black)


  • 【Rechargeable Air Compressor WORK for 10 Minutes】Please note that this portable air pump is an emergency equipment used when going out. It has a built-in 2000 mAh lithium battery, and the use time is about 10 minutes. It cannot meet the needs of long-term work. The charging time is about 2 hours. Please read the instructions carefully before use, if there is any problem with the product, please feel free to contact us.

  • 【Portable and multifunctional tire pump】The portable air compressor can be used for bicycle, motorcycle, car, balls or swim rings. With the built-in Li Ion battery, the pump can also be used as emergency lighting in the dark.

  • 【Preset tire pressure, one-button inflation, automatic stop】Tire inflator's pressure value can be set by your needs. The air pump will automatically stop inflating when the inflation reaches the preset value which can be avoid over inflating.

  • 【LCD digital pressure display】Mini electric inflatable pump with 4 kinds of unit values: PSI, BAR, KPA, Kg / cm². Please refer to the label on the tire for the air pressure required by the tire.If you don’t see the air pressure label, or if you need to inflate bicycle tires, basketballs and footballs, please inflate according to the actual application.

  • 【Safe to use and instructions of mini air pump】There are 4 kinds of charging protocol protection: over current protection, over voltage protection, short circuit protection, high temperature protection. 1,Please make sure the inflator is fully charged before use. It takes as least 4 hours after its first full charge, and at least 2 hours after. 2,It is best to cool for 8 minutes after continuous working. 3,It is recommended that the inflator should be charged every six months.

Rechargeable Air Compressor

HOW TO USE

  1. Connect one end of the inflation hose to the vent of the charging pump, then tighten clockwise, connect the other end of the hose to the center of the tire valve, and then press the inflation chuck. 
  2. Turn on the power button or plug in the power cord to start the machine: after full display of 3S, the air pump enters the measurement interface to display real-time air pressure. 
  3. Press the "UNIT" button to switch to four different units: PSI, BAR, KPA, kg/cm2. 
  4. "+" and "-" buttons are used to set the pressure value. You can adjust the pressure slowly by short pressing and quickly by long pressing, which will flash when the desired pressure value is reached. 
  5. Press the "power" button and the inflator begins to inflate the tire. When the proper tire pressure is reached, it will close automatically. 
  6. When the pressure is set to be less than the actual measured pressure, it will not inflate. 
  7. When changing a tire to inflate, turn off the "inflation switch" before turning it on. Notice: To prevent overinflated tires, it is recommended to refer to the pressure values in the car manual before inflation. Or refer to the tire markings on your bicycle.