Purchase Steps:
(Note: This Step Cannot Be Ignored Before Purchasing)
- First, Find The Select Vehicle Button At The Top Of The Page And Enter Your Vehicle (Year, Brand, Model, Trim, Engine)
- Then Enter And Add To Show If The Part You Purchased Is Suitable For Your Vehicle. Especially Need To See The Vehicle Note
- If You Are Not Sure About Your Vehicle Configuration, You Can Tell Us Your Vehicle Vin And We Will Try Our Best To Answer Your Questions
-
1.Fit For:
**FITS Models With toRSION Bar SUSPENSION Only**
**FITS 4WD/4x4 Models Only**
**Pitman Arm IS 4 GROOVE**
**EXCLUDES HD VERSIONS**
**FITS 6-LUG Models Only**
2002-2006 Cadillac Cadillac 4x4 Model Only
2001-2006 Chevrolet Avalache 1500 4x4 Model Only
1999-2000 Chevrolet Silverado 1500 4x4 Model Only
2001-2006 Chevrolet Silverado 1500 4wd Models Only Standard & Extended Cab
2007 Chevrolet Silverado 1500 4wd Models Only Classic (2007 Body Style)
2000-2006 Chevrolet Suburban 1500 4x4 Model Only
2000 Chevrolet Tahoe 4x4 Model Only Body Style (2001 Model)
2001-2006 Chevrolet Tahoe 4x4 Model Only
1999-2000 Gmc Sierra 1500 4wd Models Only
2001-2006 Gmc Sierra 1500 4wd Models Only Standard & Extended Cab Pick-Up Including Denali
2007 Gmc Sierra 1500 4wd Models Only Classic (2007 Body Style)
2000-2006 Gmc Yukon 4x4 Model Only Including Denali
2000-2006 Gmc Yukon Xl1500 4x4 Model Only Including Denali
2.Package Includes:
2x Part# Upper Control Arms + Ball Joints - K80826
2x Part# Front Lower Ball Joints - K6541
2x Part# Front Sway Bars Links - K8987
2x Part# Front Outer Tie Rods - ES3493T
2x Part# Front Inner Tie Rods - ES3488
1x Part# Pitman Arm [With 4 Grooves] - K6536
1x Part# Front Steering Idler Arm - K6534
1x Part# Idler Arm Assembly - K6659/K6723
Notes
(1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile.
(2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests.
Frequently Asked Questions:
(1).Do I need to replace the control arm if the bushings are worn?
Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm.
(2).What happens if a ball joint breaks?
When a ball joint breaks, you will hear a mysterious noise inside your car wheel.
Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control.
If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious.
Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car.
(3).What happens if I don't replace ball joints?
If you don't want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new.
(4).Do I need to grease new ball joints?
I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card.
(5).Why should I get my tie rods inspected on a regular basis?
If you don't get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it's possible that bad tie rods may be the culprit. Your vehicle's tires will also show uneven wear on the inside and outside edge of the tire when there's a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation.
(6).Vibrations
One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive.
(7).Shaking
As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom.
(8).Wandering
If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may "wander" as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic.
(9).What are the symptoms of a bad sway bar?
Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns.
(10).What happens when a sway bar breaks?
Because a sway bar helps the car's suspension to put more pressure on loaded springs, a broken sway bar means that the car's suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds.
