Description
Spacer Width 215mm each side
Quantity 4 Pieces
Bolt Pattern 5x114.3 to 5x114.3 (5x4.5")
Center Bore 60.1mm
Thread Pitch 12x1.5
Spacer Type Hub Centric w/ Hub Lip
Pre-assembled With Pressed Grade 8 Studs
This spacer set includes open end lug nuts to secure the spacers onto your factory hubs
Fitment
Scion
xB 2008-2015
tC 2011-2016
For LEXUS
ES300 1992-2003
ES300h 2013-2018
ES330 2004-2006
ES350 2007-2018
GS-F 2016-2018
GS300 1998-2006, 2018
GS350 2007-2018
GS400 1998-2000
GS450h 2008-2011, 2013-2018
GS460 2008-2011
IS200t 2016
IS250 2006-2015
IS300 2001-2005, 2016-2018
IS350 2006-2018
LS400 1990-2000
Nx200t 2015-2017
Nx300 2018
Nx300h 2015-2018
RC-F 2015-2018
RC300 2016-2018
RC350 2015-2018
Rx300 1999-2002, 2018
Rx330 2004-2006
Rx350 2008-2018
Rx350L 2018
Rx400h 2006-2008
Rx450h 2010-2018
Rx450hL 2018
SC300 1992-2000
SC400 1992-2000
SC430 2002-2010
For TOYOTA
AVALON 1005-2018
CAMRY 1992-2018
COROLLA iM 2017-2018
HIGHLANDER(HYBIRD ONLY) 2009-2013
MATRIx 2009-2013
MR2 1991-1995
RAV4 1996-2018
SIENNA 1998-2018
SOLARA 1999-2008
SUPRA 1986-1998
VENZA 2009-2016
Important Installation Notes
1. Make Sure You Get 5-7 Turns Before Tightening
2. Must Be Torqued Down By Hand At 110 FT/LBS.
3. The Back Of The Adapter Must Sit Flush On The Hub
4. No Gap Between The Adapter & Hub. Center The Adapter.
5. Please Make Sure You Take The Proper Measurements Before Purchasing
6. Failure to follow proper procedure may cause your lug nuts to come loose while driving.
Benefits
1. Improve Vehicle Stability:
2. Wheel spacers widen your vehicle wheel base, increasing stability, aggressive stance is a free bonus
3. Increase Clearence:
4. Wheel spacers increase tire to frame clearence to allow installation of lift/lowring kits and wider/larger, high traction tires.
5. Hardened CR-Steel Studs:
6. Forged, heat-treated and hardened ISO/DIN 10.9 (SAE Grade 8) wheel bolts deliver strength and corrosion resistance.

