FD4616 Fuel Filter Lower Lifter Pump Filter and Upper Fuel Bowl Filter Replacement for 3C3Z9N184CB B07BXW1321

 

Replacement Part Number:

Replacement For FD4616,GF691,PF7812,P550527,FS19797,3C3Z-9N184-CA,3C3Z-9N184-CB,6E7Z-9155-BA,1843059C91,32165C94,33599,CS9667A.

Function:Help block impurities and particles in your fuel before they can enter your engine,improve performance by ensuring a uniform fuel flow.

Feature:Easily to install,cost minutes,98% water separation efficiency.

 

Compatible with

For F250 Super Duty 2003-2007 6.0L V8 Diesel engines

For F350 Super Duty 2003-2007 6.0L V8 Diesel engines

For F450 Super Duty 2003-2007 6.0L V8 Diesel engines

For F550 Super Duty 2003-2007 6.0L V8 Diesel engines

For Excursion 2003-2005 6.0L V8 Diesel engines

For F650 2003-2008 6.0L V8 Diesel engines

For F750 2003-2008 6.0L V8 Diesel engines

For LCF 2006-2010 4.5L V6 Diesel engines

NOT FIT FOR 2006 E450 6.0L

 

Location of the filters

The primary fuel filter is located in the Horizontal Fuel Conditioning Module,mounted to the driver side frame rail.The Horizontal Fuel Conditioning Module also contains the water-fuel separator.The secondary filter is positioned on the top side of the engine,just right of the engine oil filter.Recommends replaces both fuel filters at 15,000 mile intervals under "normal" service conditions and 10,000 mile intervals under "severe" service conditions.

 

The primary fuel filter install

1.Remove the drain plug uses a 6 mm Allen wrench for the water-fuel separator and drain the fuel into a container.Allow the Horizontal Fuel Conditioning Module to drain completely,then fish out the drain plug and dispose of the fuel.

2.Remove the primary fuel filter cap with a 36 mm socket.

3.Remove the fuel filter from the cap by simply pulling it out. There is a retaining clasp on the fuel filter that snaps into the fuel filter cap.Remove and replace the o-ring from the fuel filter cap.

4.Install the new fuel filter, minding the orientation of the locking clasp and the o-ring. The o-ring side of the fuel filter is not inserted into the cap. The fuel filter should lock into the cap.Lightly coat both o-rings (cap and bottom of filter) of the new fuel filter with clean motor oil before installing into the Horizontal Fuel Conditioning Module.Torque cap to 19 lb-ft (25 N-m).

5.Reinstall the fuel-water separator drain plug.

 

The secondary fuel filter install

1.Remove the cap with either a 24 mm socket or 1/2 inch square drive.

2.Remove and discard the used fuel filter.

3.Drain the fuel filter housing of any fuel.Install the new fuel filter into the fuel filter housing.

4.Remove and replace the o-ring on the fuel filter cap. Lightly coat the o-ring with clean motor oil, then reinstall the cap. Torque to 10 lb-ft (14 N-m); do not overtighten the cap.

5.Turn the key into the "run" position (as you would to initiate the glow plug sequence) for 30 seconds, then back to the "off" position. Repeat this procedure a minimum of 3 times in order to prime the fuel system before starting.

EC781 Oil Filter Cap and FL2016 Oil Filter Replacement for 1840754C91 3C3Z-6766-CA Plastic Cap

Material: Made of high-grade heat-resistant plastic, it has excellent oil and corrosion resistance. The lightweight and durable design reduces engine strain while ensuring long-lasting performance and environmental reliability.

Replacement Part Number:

Cap:Replacement For EC781,1840754C91,3C3Z-6766-CA,RK31821,904-204.

Filter:Replacement For FL2016,3C3Z-6731-AA,1840752C91,PF1704,P7235,CH9549,57311,P550528,LF16166,ML1034.

Easy Installation: Designed for a hassle-free fit, it seamlessly integrates with your vehicle's existing system, allowing for a quick and secure replacement that gets you back on the road in no time.

Notice:Periodic maintenance on a vehicle is advised for every 3000 to 5000 miles. That maintenance should include a change of the oil filter.

Feature

Complete filtration of engine oil, which ensures high performing fuel injectors and long engine life.Optimally screening out 98% of abrasives such as such as carbon, sand, dust and bits of metal before they get into your oil.Helps protect against engine wear.Protect your engine and keep your emissions control systems working properly.Precisely engineered for your Power Stroke Diesel engine.The oil filter should be changed every 7,500 miles under normal operating conditions and 5,000 miles under "severe" operating conditions.

Fitment

For E-350 Super Duty 2004-2010 6.0L

For E-350 Club Wagon 2004-2005 6.0L

For E-450 Super Duty 2004-2010 6.0L

For Excursion 2003-2005 6.0L

For F250 Super Duty 2003-2007 6.0L/2008-2010 6.4L

For F350 Super Duty 2003-2007 6.0L/2008-2010 6.4L

For F450 Super Duty 2003-2007 6.0L/2008-2010 6.4L

For F550 Super Duty 2003-2007 6.0L/2008-2010 6.4L

For F650 2004-2008 6.0L/2000-2008 5.9L

For F750 2004-2008 6.0L/2000-2008 5.9L

Package includes: 1 * oil filter cap, 1 * oil filter, 2 * o-ring seal.

1 x Upper Fuel Bowl Filter,1 x Lower Lifter Pump Filter,2 x O-ring.