Mishimoto MMCFK-JK-12BK Jeep Wrangler JK Coolant Filter Kit, 2012-2018 | Part# MMCFK-JK-12BK |
|---|
Direct-fit for 2012-2018 Jeep Wrangler JK 3.6L; ?Filters solids from your Jeep's cooling system; Helps prevent clogging and extends the life of your Jeep's radiator heater core and other cooling system components; Installs in under 1 hour; Mishimoto Lifetime Warranty
The cooling system in your 2012-2018 Jeep Wrangler is one of the most crucial systems in the entire vehicle. If just one component in the cooling system fails or becomes clogged it can be catastrophic. A clogged heater core is inconvenient on a chilly night's drive but a clogged radiator can leave you out in the cold with a blown engine. Unfortunately for many JK Wrangler owners repeated clogging and replacement of cooling system components is an all too familiar scenario. Normal engine wear and servicing can introduce damaging solids into the cooling system wreaking havoc as they go. 2012-2018 JKs are particularly susceptible however thanks to excess casting sand left in the cylinder heads from the factory. But Mishimoto is here to help clean up your JK?s cooling system. Our 2012-2018 Jeep Wrangler JK Coolant Filter Kit will help keep anything that?s not liquid coolant from circulating around your engine and cooling components. This direct-fit kit installs in under an hour and the included Wix? filter traps particles as small as 27 microns. Our silicone hoses are a direct fit and the included ball valves make for a durable and long-lasting system. The 4mm-thick steel bracket can stand up to anything the street or trail can throw at it. Like all Mishimoto products the Mishimoto 2012-2018 Jeep Wrangler JK Coolant Filtration Kit is backed by our Lifetime Warranty.
Manufacturer Warranty by Mishimoto: Lifetime Warranty
Established in 2003; our company has more than 10 years of experience in working toward our goal of providing superior cooling system upgrades for daily drivers; track cars; trucks; and bikes. Mishimoto was created for automotive enthusiasts by automotive enthusiasts. We are a cohesive team that works hard to consistently provide the highest quality products and service!
- Install Difficulty:2
- SellingPoint01:Direct-fit for 2012-2018 Jeep Wrangler JK 3.6L
- SellingPoint02:Filters solids from your Jeep's cooling system
- SellingPoint03:Helps prevent clogging and extends the life of your Jeep's radiator, heater core, and other cooling system components
- SellingPoint04:Installs in under 1 hour
- SellingPoint05:Adjustable filter head and cut-to-length hoses can accommodate supercharger piping or other modifications
- SellingPoint06:Includes Wix coolant filter to remove particles as small as 27 microns
- SellingPoint07:4mm-thick steel bracket will stand up to anything the road or trail can throw at it
- SellingPoint08:Includes durable ball valves for long-lasting and leak-free service
- SellingPoint09:Direct-fit hoses make installation quick and easy
- SellingPoint10:Mishimoto Lifetime Warranty
- SellingPoint11:N/A
- SellingPoint12:N/A
- SellingPoint13:N/A
- SellingPoint14:N/A
- SellingPoint15:N/A
- TechSpec Applications:2012-2018 Jeep Wrangler JK 3.6L Pentastar
- TechSpec Caution:N/A
- TechSpec Chassis Codes:N/A
- TechSpec Core Construction:N/A
- TechSpec Core Height (in):N/A
- TechSpec Core Length (in):N/A
- TechSpec Core Thickness (in):N/A
- TechSpec Engine Codes:N/A
- TechSpec Fluid Capacity (qts):N/A
- TechSpec Includes:Application-Specific Mounting Bracket--Silver, Anodized 6061 Aluminum Filter Mount--Coolant Filter--Direct-Fit Silicone Hoses--Brass Ball Valves--Worm Gear Clamps--Mounting Hardware--Mishimoto Lifetime Warranty
- TechSpec Inlet:N/A
- TechSpec Installation Notes:22 in-lbs recommended for all worm gear clamps. These clamps have an operating range of 18-27 in- 2-3NM. Do not exceed the maximum torque rating of 27 in-lbs
- TechSpec Note:This coolant filter kit will not repair or reverse damage caused by sediment or other solids in the cooling system. Mishimoto recommends following all manufacturer cooling system service procedures and maintenance intervals.----Mishimoto recommends changing the coolant filter after the first month, again after 3 months, and then every year after that, depending on driving conditions. Because each engine was cast differently, there will be a different amount of debris in each engine. Utilizes WIX filter #24070
- TechSpec Outlet:N/A
- TechSpec Overall Height (in):N/A
- TechSpec Overall Length (in):N/A
- TechSpec Overall Width (in):N/A
- TechSpec Rows:N/A
- Quantity per Application:Normal Quantity Used in a Vehicle:1 Each
Package Weight/Dimensions
Weight (lbs) :14Height (inches) : 8
Width (inches) : 14
Length (inches) : 20
Disclaimer: Some items may be for competition (race / off-road) use ONLY. Check legality of aftermarket products with your local state, county, city authorities before purchasing. Parts with a CARB EO# are legal in all 50 states, California included, and are designed for pollution controlled vehicles. Check your state and local laws regarding the use of any performance products.