PLEASE NOTE: All items will be shipped and delivered by the following services: Evri, DX, DHL and Royal Mail. The service used is dependent on location of delivery, weight of parcel, size of parcel, value of contents and carrier restrictions of transport.

Heavy Duty Multiple Layer Paint Varnish Stripper Gel Bartoline Paint Predator

Bartoline Paint Predator Heavy Duty is a high-performance paint and varnish stripper specially formulated to penetrate and strip multiple paint layers. Its methylene-chloride-free, non-flammable formulation has minimal evaporation that continues to work and does not “flash off”. Non-caustic, and non-drip it is ideal for vertical surfaces and less accessible areas and is suitable for indoor and outdoor applications.
  • PERFORMANCE PAINT AND VARNISH STRIPPER: Formulated to remove multiple layers of solvent and water-based paints, including tough polyurethane varnishes; for heavy-duty stripping tasks in home renovation and furniture restoration projects
  • NON-CAUSTIC AND METHYLENE CHLORIDE-FREE: Safer alternative to harsh chemical strippers with a non-flammable, low-evaporation formula that continues to work without flashing off; suitable for DIYers and professionals
  • FOR VERTICAL AND HARD-TO-REACH SURFACES: Thick, non-drip consistency makes it easy to apply on doors, walls, and intricate surfaces without running; works effectively on wood, masonry, and most metal substrates
  • EASY TO APPLY AND EFFECTIVE: Simply brush on a generous coat, leave for an hour, and scrape off softened paint; for multiple layers, apply a second coat using a dabbing motion or cover with plastic sheeting for 6-8 hours to maximize effectiveness
  • RESIDUE-FREE FINISH AND EASY CLEANUP: Once stripping is complete, wash down with detergent and water, then rinse with clean water; leaves surfaces clean, dry, and ready for refinishing or repainting
Coverage: 500ml will cover approx. 0.5m²

Size: 500ml

Usage Instructions: 
  1. Pour a quantity of Bartoline Paint Predator Heavy Duty into a suitable container.
  2. Apply a generous thick but even coat by brush onto the surface to be stripped at a rate of 1L per sq. metre.
  3. Do not brush out. Leave to dry for approximately 1 hour until the product reacts to the paint or varnish and apply a second coat of stripper using a dabbing motion.
  4. For areas where there are fewer than 5 layers of paint or varnish a second coat may not be required.
  5. Leave until the stripper has softened the coating and scrape off using a shave hook
  6. Repeat the steps above if necessary.
Warning:
Harmful if inhaled.
Harmful if swallowed.