MATEK XT60 Power Hub PDB Power Distribution Board with BEC 5V/12V For F3 F4 F7
Features: brand new and
The PDB-XT60 has been engineered to provide the highest possible and reliability in a 36x50mm & 4 layers PCB.
It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated 5V outputs & linear regulated 12V for powering Cameras, Servos, receiver, Flight Controllers, Video Transmitters, LEDs, etc.
It a XT60 socket to the LiPo pack conveniently.
2oz , 4-layers &1.6mm PCB.
Built-in XT60 Socket.
Total 6 pairs solder tabs are fit for or X type frame.
5V & 12V Output LED indicators & Short circuit tolerant.

Specifications: - Input (3S-4S LiPo operation): 9 - 18V
- Regulated 5V and 12V outputs
- LED power indicators ( 5V & 12V outputs )
- 6 outputs & 1 pair VCC/GND pads

outputs:
- Continuous current: 25Ax4 or 15Ax6
- current (10 seconds/minute): 30Ax4 or 20Ax6

BEC 5V output:
- Designed for Receivers, Flight controllers, OSD, and Servos.
- DC/DC synchronous regulator.
- : 5.0 +/- 0.1VDC
- Continuous current: 2 Amps (Max.2.5A 10s/minute)
- Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
- Short-circuit tolerant (5 seconds/minute)

BEC 12V output:
- Designed for Video or FPV camera with linear regulator.
- The battery should be 4S LiPo (13~18V DC)
- : 12.0 +/- 0.3VDC
- Continuous current: 500mA (Max.0.8A 5s/minute)
- Short-circuit tolerant (2 seconds/minute)

BEC 12V @ 3S LiPo
- Output voltage= 3S LiPo -1V

Physical:
- Dimensions: 36 x 50 x 4 mm (without XT60)
- Mounting: 30.5 x 30.5mm, Φ3mm
- Weight: 7.5g(w/o XT60), 11g(w/ XT60)

Package Includes: 1Set x Power Distribution Board

note: Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!