2026 XTOOL D7S Full Diagnostic Tool ECU Coding  Bidirectional Scanner Tool with

☑️FCA AutoAuth☑️PMI☑️39+ Resets☑️V.A.G Guide☑️Online ECU Coding☑️Active Test

☑️Crank Sensor Relearn☑️Full System Scan☑️CAN FD/DoIP ☑️ AI-Assisted Smarter Analysis 

Have you ever been bothered by these problems:

• The device is always unable to scan the required system.
• The reset functions of your diagnostic scanners are not enough.
• Limited vehicle compatibility of your automotive scan tools cannot cover more business.
• The scanner with active control in the market is too expensive.

• 🔥Newly Upgraded Features:✔️Code(For BMW/Mercedes/Volkswagen)+✔️PMI(Programmable Module Installation,For Ford/Lincoin/Mazda)+✔️V.A.G(For Volkswagens/Audis/Skoda)+✔️V2.0 Diagnostic Report
• 4000+Bi-directional Control(Active Test):Perform various active tests to check the integrity of systems or components and the operating conditions of various car systems or sub-systems without using the vehicle controls to test ABS motor, window, door, solenoids, relay, switch, valves, sunroof, headlamps and etc to check its functionality.
• OE-Level Full Systems Diagnostics:D7S auto scanner with complete capabilities for read & clean DTCs, live data, active test, information, adaptation, matching, etc. Powerful OE level diagnostics for more than 80 US, Asian and European makes and models.
• 39+ Advanced maintenance services: Covers all common maintenance functions like Oil Reset, ABS Bleeding, Injector co^ding, Fuel Trim Learn, Transmisson Reset, Language Change, A/F Settings, Stop/Start Reset, SAS Reset, TPMS Reset, DPF Reset, BMS Reset, Window/Sunroof  Initialization, Power Balance, VGT Learn, Seat Calibration, etc.
• 2026 upgraded V2.0 Diagnostic Report:✔️Repair shops add shop logos/customer information/attachments, ✔️revise diagnostic report name, ✔️select diagnostic report content, ✔️save/share it via ema!ls,✔️highlighting critical systems with signage to enhance readability, ect.
• Added FCA AutoAuth Function--Newest:XTOOL D7S V2.0 Automotive Diagnostic Scanner supports access to the Security Gateway Module For(2017)Fiat/For (2018）Chrysler/Dodge/Jeep/Renault vehicles so that diagnostic tools can clear codes, run bi-directional active tests, drive, relearn and even IMMO passwords Immobilizer (PIN extraction and writing), ECU encoding, initialization, ADAS calibration assistance, etc. (No Need FCA 12+8 Cable).  🔔🔔Note:The user is required to register an FCA account, any charges have nothing to do with the seller.
• AI-Assisted Smarter Analysis – Repair with Confidenc：The XTOOL D7S is more than a basic scanner—it's your intelligent AI diagnostic assistant. DIYers get instant fault code analysis with clear repair solutions. Mechanics access in-depth system reports. Beginners follow step-by-step guidance. Diagnose accurately and act decisively with every repair. Note: AI suggestions are for reference only.
• Support CAN FD/DOIP Protocol:Compatible More CAN FD Protocol Vehicles (For GM Vehicles After 2020) (CAN FD Adapter NO Needs Buy Separately);  DOIP Function CompatibleFor BMW E/F/G Chassis, Jaguar, Land Rover vehicle makes
• ECU Coding:you can unlock hidden functions, change between the preprogra&mmed softwares to improve your vehicle performance, match the blank ECU after replacment and etc.  Fit for VW/for AUDI/for SKODA/for Benz/for MIT ONLY.
• IMMO(Key Programming):
  >>>Mainly used for key matching, the main functions include key matching, key information reset, key addition, key loss matching, key addition matching (addition is divided into adding primary/secondary keys) 
• UP TO 8 Live Data Showing in 1 Graphing for more in-depth analysis:Instead of just 8 separate data streams appearing on one screen, the XTOOL D7 can display 8 live data streams in one graph.Display these graphics individually or merge them for easier comparison on the screen. Which makes diagnosis easier and more convenient.
• 24+ Language Supported: English, German, Spain, French, Polish, Portuguese, Russian, Italian, Turkish, Traditional Chinese, Japanese, Korean, Vietnamese, Arabic, Finnish 🔔🔔Note: English is default language, if you need other language, Please send the S/N to us authorized language.
• Free upgrade 3-years - save AU600$ beat other scanners in the same arange
• Hardware configuration:2500mAh Battery(=5000mAh 3.7V)7-inch LED capacitive screen with 1024×600 resolution,Quad-core 1.6GHz Processor, Microphone, dual speakers, 4-band 3.5mm stereo/standard headset jack,Internal reliable 64GB On-board Memory. Dual Wi-Fi to access your favorite web resources faster.

• ECU Coding: Recode Changed Modules,Optimize Vehicle Performance,Re-Flash Hidden Functions,Renew ECUs Coordination,Repro-gram Adaptive Data,Improve Fuel Efficiency,Reduce Power Loss,Improve the Durability of Mechanical Parts. Compatible with B-MW, A-udi, VW, Skoda, etc.
• Matching: Rematch the repaired or changed component control modules.
• Personalize: Activating daytime running lights,activating the acoustic warning signal,changing the brightness of the dashboard,adjusting interior lights,automatically activating the rear -view camera,adjusting the level of the side mirrors etc.
• Disable some unneeded functions: such as deactivating injector buzz sounds,deactivating the auto start-stop,disabling seat-belt warning and more;
• But Note:1. Online Coding&Online Pro-gramming is not available.2. Coding function varies by vehicle model.
• Programmable Module Installation: XTOOL D7S automotive tools mechanics has the PMI Function allows you to copy the data from the module and install it to the new unit to finish the module replacement.Compatible with B-MW, Ford, Mazda, A-udi, Skoda, etc.

OE LEVEL FULL SYSTEM DIAGNOSTIC

𝐎𝐄-𝐋𝐞𝐯𝐞𝐥 𝐅𝐮𝐥𝐥-𝐒𝐲𝐬𝐭𝐞𝐦 𝐃𝐢𝐚𝐠𝐧𝐨𝐬𝐭𝐢𝐜𝐬 & 𝐂𝐨𝐯𝐞𝐫𝐚𝐠𝐞 𝐟𝐨𝐫 𝟏𝟎,𝟎𝟎𝟎+ 𝐕𝐞𝐡𝐢𝐜𝐥𝐞𝐬:XTOOL D7S V.2.0 provide dealer-level full system scanning, read & clear DTCs, read ECU Info, retrieve Freeze Frame, monitor Live Data, perform active tests and full obd2 functions. Supporting over 150 brands and 10,000+ models globally (covering US, EU, Asia, and Australia), the D7S V.2.0 is compatible with CAN FD for GM, for Cadillac, for Buick(MY2020+) and DoIP for BMW(E/F/G Chassis), for Land Rover, for Jaguar. It overcomes FCA vehicle gateway restrictions (Jeep, Dodge2018+, Chrysler, Fiat 2017+). 𝐍𝐎𝐓𝐄: Please contact us to check compatibility before purchasing.

Retrieve ECU Information - display unit type, version numbers, and more specifications.
Read DTCs- show you detailed DTCs definition and useful information for diagnostics
Clear DTCs- erase the faulty DTCs after repairing and turn off the check engine light.
View the Live Data - provide live data and parameters from the vehicle’s E U to help you quickly find potential problems in the vehicle.

🔔🔔Note: Specific systems vary by model, make, year, etc. You can check function compatibility by messaging our post-sales team.

𝟒𝟎𝟎𝟎+ 𝐁𝐢-𝐃𝐢𝐫𝐞𝐜𝐭𝐢𝐨𝐧𝐚𝐥 𝐂𝐨𝐧𝐭𝐫𝐨𝐥 𝐟𝐨𝐫 𝐏𝐫𝐞𝐜𝐢𝐬𝐞 𝐀𝐜𝐭𝐢𝐯𝐞 𝐓𝐞𝐬𝐭𝐢𝐧𝐠

XTOOL bidirectional scan tool OBD2 function allows you to perform over 4000 active tests, such as fuel injectors, ABS pumps, valve, wipers, A/C clutch, fuel pump, cooling fan testing, enabling quick component status verification. This minimizes repeated disassembly, improving repair efficiency.

• For Ford: A/C Compressor Test, ABS Pump Test, Transmission Control Module (TCM) Test, O2 Sensor Test, E*VAP Purge Solenoid Test, and more.
• For Chevrolet: Fuel Pressure Test, S*park Plug Test, Transmission Fluid Pressure Test, Engine Coolant Temperature Sensor Test, and more.
• For Toyota: E*VAP Purge Solenoid Test, Injector Buzz Test, O2 Sensor Test, Electric Water Pump Test, Idle Speed Adjustment Test, Throttle Position Sensor Test, and more.
• For Nissan: Electric Water Pump Test, Accelerator Pedal Position Sensor Test, Idle Air Control Valve Test, CVT Operation Test, and more.
• For Honda: Fuel Pump Test, O2 Sensor Test, Throttle Actuator Test, Electric Water Pump Test, and more.
• For Hyundai: Radiator Fan Test, ABS System Test, E*VAP Purge Solenoid Test, and more.
• For Chrysler: Fuel Composition Reset, E*VAP Purge Solenoid Test, O2 Sensor Test, Engine Light Test, Fuel Pump Relay Test, Fuel Injector Balance Test, and more.
• For Mazda: Radiator Fan Test, O2 Sensor Test, Battery Voltage Test, Throttle Actuator Test, and more.
• For Subaru: Idle Speed Adjustment Test, O2 Sensor Test, Rear Wiper Test, and more.
  

🔔🔔NOTE: update the software to get this function and send the VIN for check compatibility first. It is not universal to all vehicles

39+ HOT RESET FUNCTIONS:

• Service/Maintenance Light: Reset service intervals after oil change and turn off the oil light.
• Electric Parking Brake: Reset brake pads after replacement of brake system.
• Steering Angle Sensor Adjustment: Perform calibration of the steering angle sensor
• BMS Reset: Register the new battery to the E U after replacement.
• Throttle Relearn: Enables you to make initial settings to throttle to adjust the amount of air intake.
• ABS Bleeding: Perform ABS Brake Bleed function to cycle the ABS pump to bleed the air out of the ABS.
• Injector Coding: Coding injectors after replacement.
• Transmission/ Gearbox Match: Reset the adaptive shifting points in your automatic Transmission Control Unit.
• Air Suspension: Calibrate the suspension height.
• Headlight: Initialize the adaptive headlight system.
• Key Programming: Disable the lost vehicle 1MM0 and pro&gram a new replacement 1MM0 f0b.
• Airbag Repair: Allows you resets the airbag data to clear the airbag collision/crash data.

2026 Newest Add Functions: 🔥HVAC Control Module Calibrate, 🔥Hybrid Control Compression Test, 🔥Language change, 🔥A/F Settings, 🔥Stop/Start Reset, 🔥Air Suspension, 🔥Headlight, 🔥Transport Mode,🔥 Tire Upgrade, 🔥Crankshaft Position Sensor learning, 🔥Zero Point Calibration, 🔥Fuel Trim Reset, 🔥Fuel Alcohol Composition Reset, 🔥Air/Fuel Reset, 🔥EVAP Test, 🔥Idle learn Reset, etc

𝐓𝐢𝐩: Compatibility varies by cars, please contact us to check compatibility first.

IMMO(Key Programming):

Stop paying high locksmith fees! The XTOOL D7S V2.0 is a powerful IMMO (Immobiliser) Key Programming and diagnostic tool. Perfect for key matching, adding new primary or secondary keys, and handling key loss by securely erasing lost keys from your car's system. It also performs key information reset. Designed for ease of use, it saves you time and money. This OBD2 Scanner is an essential auto diagnostic tool for Australian vehicle owners. Take control of your car's security with the versatile XTOOL D7S V2.0 !  

V.A.G GUIDED FUNCTIONS:

Guide VAG vehicles effortlessly to diagnostic and maintenance with VAG Guided function. And you can orchestrate active tests to quickly check the work status, including but not limited to injector tests, compression tests, and A/C clutch assessments, and also including ABS pumps, fuel pumps, windows, sunroofs, lights, and much more. Nonetheless, it's imperative to check compatibility before making your purchase

XTOOL D7 SCANNER TOOL WITH FCA AUTOAUTH & DOIP / CANFD PROTOCOL 

Autoauth for FCA SGW

Use the latest software update function AutoAuth to provide systems diagnosis, active test, retrieve module info, ecu coding, etc., making the diagnostics more secure. Applicable to FCA vehicles(Chrysler, Dodge, Jeep, Fiat) equipped with a security gateway module (SGW) in 2017 and later. (Note: There is an annual fee for Autoauth account, but the payment is charged by AutoAuth directly. XTOOL is not involved in any transaction process.)

>>> XTOOL D7S OBD2 Scanner V2.0 is now more powerful than ever! Featuring FCA AutoAuth, the XTOOL D7S OBD2 scanner diagnostic tool seamlessly works with For Chrysler, For Jeep, For Dodge (2018+), and For Fiat (2017+), granting access to critical vehicle systems without gateway restrictions.  Experience next-level diagnostics with the XTOOL D7S V2.0 obd2 diagnostic scanner!  

CANFD&DOIP Protocols:

The application of new protocols CAN FD/DOIP boosts 6x faster vehicle communication between modules, get much higher data rates & faster diagnostic speed than ever.

CANFD Protocol:

CAN with flexible data rate (CAN FD) overcomes the limitations of the classical CAN bus in terms of data transfer rate. With advanced CRC algorithm and much wider compatibility, it will accommodate more data, run faster, improve communication speed, reduce the risk of missed.

>>>Fit for GM Vehicles from 2020-2026 including Onix/Tracker/Cavalier/Encore/Suburban/Escalade/Tahoe/Yukon/Grand Cherokee/Montana/Silverado/Sierra/... keeps growing

DOIP Protocol (Need Purchase extra DOIP Connector):

DoIP diagnostic function enables the use of diagnostics introduced via UDS on TCP/IP and Ethernet. This allows the XTOOL D7S to save time and money when performing complex diagnostic tasks and flash memory applications.

>>>Fit for BMW F&G chassis, Volvo models 2018 and later, Land Rover & Jaguar models 2017 and later, more keeps growing.

More Details of Car Brands:

[America]: Compatible with Chevrolet, Buick, Cadillac, Chrysler, Dodge, Ford, GMC, etc.

[Asia]: Compatible with Infiniti, Acura, Kia, Lexus, Hyundai, Subaru, Daewoo, Daihatsu, Mitsubishi, Honda, Mazda, Suzuki, Toyota, etc.

[Europe]: Compatible with BMW, Benz, Audi, Porsche, Abarth, Alfa Romeo, Bugatti, Citroen, Dacia, Volvo, VW, Land Rover, Opel, Peugeot, Renault, Fiat, Jaguar, Lancia, Mini, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, etc.

NOTICE: Kindly send your VIN to check compatibility as the function vary on cars. Menu varies by vehicle's make, model, and year！

XTOOL D7S SCANNER: MORE FUNCTIONS WAITING FOR YOU TO SEE!

🔔🔔 Note: XTOOL D7S Diagnostic Scan Tool will support vehicles with DoIP procotol, but you will not see the DoIP port available anymore. The DoIP port is now been integrated into the VCI box to make sure the connection and data transfer more stable. You can learn more details from user manual on description page.

AUTO VIN SCAN

XTOOL D7S diagnostic system features the latest VIN-Based Auto VIN Scan function to identify vehicles and scan all the diagnosable and run diagnostics on the selected system. This function is compatible with 2006 and newer vehicles.

• Auto VIN&Scan:One-click quick identification of the vehicle VIN into the vehicle system for system diagnosis.
• Automatic Detection: Automatic diagnosis of all system systems within the model.
• Manual Selection: Select any system within the model for diagnosis, saving time spent on system-wide diagnosis and improving work efficiency.
• Manual Input:Suitable for a small number of models that do not support automatic VIN recognition, manual input of the VIN can also be used to diagnose and locate faults on the vehicle.

Once connected correctly to the vehicle, the D7S OBD2 scanner will automatically and quickly retrieve the vehicle's VIN and information. It can read and clear codes, display a 8-in-1 data stream graph, and provide quick analysis and diagnostics to address potential vehicle issues. Additionally, it generates a complete diagnostic report, and the vehicle health report can be recorded and replayed. An automatically generated QR code allows you to view it on your phone, share it via email, and print it from your computer.

Work on 100+ brands and 20000+ models & Global Languages: English, French, Spanish, German, Italian, Russian, Portuguese, Japanese, Korean, and Polish.