Serpentine Belt Tensioner W/ Pulley For 03-09 Honda Accord 05-10 Acura MDX/RL/TL

A tensioner pulley on most newer cars-from the mid 1980s to present-is actually part of a two-piece component called the automatic belt tensioner. The tensioner's job is to apply the correct amount of tension to the serpentine belt by employing an internal coil spring. The pulley is then attached to the tensioner and acts as a guide for the tensioner to function.
In most vehicle applications, the pulley can be disconnected from the tensioner and then replaced. But it's best to inspect the functionality of the tensioner as well, since the unit needs to be removed to replace the pulley. The level of difficulty widely varies per make and model.

Application For 

For 2003-10 Acura MDX Serpentine Belt Tensioner with Pulley
For 2005-10 Acura RL Serpentine Belt Tensioner with Pulley
For 2007-08 Acura TL Serpentine Belt Tensioner with Pulley
For 2010 Acura ZDX Serpentine Belt Tensioner with Pulley
For 2008-09 Honda Accord Manual Transmission V6 3.5L
For 2003-07 Honda Accord Serpentine Belt Tensioner with Pulley V6 3.0L
For 2005-10 Honda Odyssey EX Serpentine Belt Tensioner with Pulley
For 2005-10 Honda Odyssey LX Serpentine Belt Tensioner with Pulley
For 2005 Honda Pilot Serpentine Belt Tensioner with Pulley
For 2006-08 Honda Pilot All Wheel Drive Serpentine Belt Tensioner with Pulley
For 2006-10 Honda Ridgeline Serpentine Belt Tensioner with Pulley

Package Included

1X Serpentine Belt Tensioner w/ Pulley

What is a tensioner pulley?

A tensioner pulley on most newer cars -- from the mid 1980s to present -- is actually part of a two-piece component called the automatic belt tensioner. The tensioner's job is to apply the correct amount of tension to the serpentine belt by employing an internal coil spring. The pulley is then attached to the tensioner and acts as a guide for the tensioner to function.
In most vehicle applications, the pulley can be disconnected from the tensioner and then replaced. But it's best to inspect the functionality of the tensioner as well, since the unit needs to be removed to replace the pulley. The level of difficulty widely varies per make and model.

Installtion

• Step 1:Read the repair manual section that illustrates the procedure to remove and replace the automatic belt tensioner in your vehicle. Every engine type in different vehicles will employ a different procedure. This will help inform you what you're getting into before starting. Obtain the belt routing diagram from the repair manual if you're replacing the belt as well.
• Step 2:Locate the automatic belt tensioner on the side or front of the engine. Inspect the tensioner to use the right tool to release the tension on the belt so you can remove it from the pulley. Some may feature a 3/8-inch square-drive or 1/2-inch square-drive inlet that an appropriate-sized ratchet or serpentine belt tool adapter will fit into. Others may employ the bolt head of the tensioner pulley itself to pivot the tensioner in a clockwise motion.
• Step 3:Install the proper tool into the square-drive inlet or bolt head provided with the chosen tool and then pivot the tensioner. The repair manual will illustrate which way the specific tensioner needs to move to release the tension. As stated in Step 2, tensioners that use the pulley bolt most often turn clockwise since the bolt itself will unscrew from the pulley if turned counterclockwise.
• Step 4:Remove the belt from the most accessible pulley with the tensioner in the pivoted position (see Warnings). Allow the tensioner spring to relocate back to its seated position carefully and remove the tool. If the belt is being replaced, remove it from the pulley system. If you're not replacing the belt, let it stay intact with the other remaining pulleys.
• Step 5:Locate and remove the automatic belt tensioner retaining bolt . Remove the belt tensioner and inspect the rear of it for an aligning dowel. This dowel needs to be set into an inlet on the engine properly to position the tensioner correctly. The new tensioner, if applicable, will provide a new molded dowel. If you're replacing the entire automatic belt tensioner, reinstall now and torque the retaining bolt to specifications provided in the repair manual using a torque wrench and a socket and skip Step 6.
• Step 6??Place the automatic belt tensioner into a bench vise, being careful not to overtighten the clamps. Many tensioners are made of lightweight aluminum and can easily crack. Position the tensioner in the vise so you can access the pulley bolt. Turn the pulley bolt counterclockwise with a ratchet and a socket. Remove the bolt, the retaining washer and the pulley. Replace the pulley, washer and bolt and tighten to specified torque illustrated in the repair manual. Replace the tensioner in the engine and replace the bolt. Tighten to specified torque.

why choose us?

• Strict quality control standards to Build and test
• Easy install and Simple operation
• 1 Year Warranty

Note

• The part Number:53030958, 53030958AB, 53030958AC, 53030958AD,38167, 49464,39120, 53030958AG .Please check the  compatibity list before Purchase.
• Please remember to wear protective gear when handling and/or installing any auto part.
• If you have any question,please contact us before or after your purchase,TANK YOU!!

About us:

Our store, USdealsparts, located in Ontario, California, United States, are committed to provide most of the Auto Parts & Accessories, and car tools, with high quality product. 

All the package will be handled within 48 hours, over 90% of the pacakge will be pacakged within 24 hours.

And it takes about 2-7 days in transit.

If you have any quesiton or problem, contact us vis ebay message.

Steps of confirming the compatibilities:

• Manage "My Garage", and chose the right one when placing order;