The Kramer Electronics TP-580XR-K comes with (1) HDBaseT Transmitter for Extended Range, (1) HDBaseT Receiver for Extended Range and (2) 10-foot HDMI to HDMI Cables.
The Kramer TP-580TXR is an extended range, HDBaseT twisted pair transmitter for HDMI, bidirectional RS-232 and IR signals. The TP-580TXR converts the HDMI signal, RS-232 and IR signals to a twisted pair signal. When paired with the TP-580RXR these two units form an extended HDMI/data line transmission and reception system or can seperately connect to other certified HDBaseT devices to form the transmission and reception system.
Kramer's TP-580RXR is an extended range, HDBaseT twisted pair receiver for HDMI, bidirectional RS-232 and IR signals. The TP-580RXR receives an HDBaseT twisted pair signal from the TP-580TXR and converts it back into HDMI, RS-232 and IR signals.
Kramer's C-HM/HM cable supports signals up to 4K @60Hz (4:4:4), Deep Color, x.v.Color™, Lip Sync, 7.1 PCM, Dolby TrueHD, DTS-HD, CEC. This particular model measures 10ft in length.
Kramer TP580TXR Features
- Max. Data Rate - 10.2Gbps (3.4Gbps per graphic channel)
- HDTV Compatible
- HDCP Compliance
- HDBaseT™ Technology
- HDMI Support - Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC
- 3D Pass-Through
- EDID PassThru - Passes EDID signals between the source and display
- 2K & 4K Support
- Bidirectional RS-232 & IR Interface. - Commands and data can flow in both directions via the RS-232 interface, allowing status requests and remote control of the destination unit
- System Range - Up to 130m (430ft) normal mode; up to180m (590ft) Ultra mode (1080p @60Hz @24bpp) when using BC-DGKat623 cables
- Cable - For optimum range and performance use, use Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges
- Indicators - Status LEDs for input, output, link and power
- Compact DigiTOOLS® - 3 units can be rack mounted side-by-side in a 1U rackspace with the optional RK-3T universal rack adapter
Kramer TP580RXR Features
- Max. Data Rate: 10.2Gbps (3.4Gbps per graphic channel)
- HDTV Compatible
- HDCP Compliance
- HDBaseT™ Technology
- HDMI Support: Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC
- 3D Pass-Through
- EDID PassThru: Passes EDID signals between thes ource and display
- 2K & 4K Support
- Bidirectional RS-232 & IR Interface: Commands and data can flow in both directions via the RS-232 interface, allowing status requests and remote control of the destination unit
- System Range: Up to 130m (430ft) normal mode; up to180m (590ft) Ultra mode (1080p @60Hz @24bpp) when using BC-DGKat623 cables
- Cable: For optimum range and performance use, use Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and displayused. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges
- Indicators: Status LEDs for input, output, link and power
- Compact DigiTOOLS®: 3 units can be rack mounted side-by-side in a 1U rackspace with the optional RK-3T universal rack adapter
Kramer TP580TXR Specifications
- Outputs: 1 HDBaseT twisted pair RJ-45 connector
- Inputs: 1 HDMI connector
- Ports: 1 IR on a 3.5mm mini jack, 1 RS-232 on a 9-pin D-sub connector
- Bandwidth: 10.2Gbps (3.4Gbps per graphic channel)
- RS-232 Baud Rate: 115200
- Compliance With HDMI Standard: Supports HDMI and HDCP
- Power Consumption: 12V DC, 380mA
- Dimensions (WxDxH): 7.4" x 4.5" x1.0" (18.8cm x 11.4cm x 2.4cm)
- Weight: 1.4lbs (0.6kg)
- Accessories: Power supply
Kramer TP580RXR Specifications
- Inputs: 1 HDBaseT twisted pair RJ-45 connector
- Outputs: 1 HDMI connector
- Ports: 1 IR on a 3.5mm mini jack, 1 RS-232 on a 9-pin D-sub connector
- Bandwidth: 10.2Gbps (3.4Gbps per graphic channel)
- RS-232 Baud Rate: 115200
- Compliance With HDMI Standard: Supports HDMI and HDCP
- Power Consumption: 12V DC, 380mA
- Dimensions (WxDxH): 7.4" x 4.5" x1.0" (18.8 x 11.4 x 2.4cm)
- Weight: 0.6kg (1.4lbs)
- Accessories: Power supply
- Options: RK-T2B 19” rack mount
- Options: RK-T2B 19” rack mount