Garmin GLS10 livescope Cable Cover, 3D printed using PETG plastic. Purpose of the cover is to protect the plastic power, network, and lvs32\lvs34 transducer connections from impact or the blackbox being placed in a tight space, causing excess lateral stress on the connections.
The cutouts are positioned at a smaller diameter point on the cable. Even when the connections are not screwed together, with the cover properly secured, you can not pull the cables and unplug them from the blackbox. There is a window on the top and the front that allows visual access to the status light.
PET and PETG is used in many everyday items, UV resistant, durable, will not warp while out fishing.
Allen key is included.
Recommended install is to have the cables attached, loosen the blackbox and slide half of the cover under the cables. Then tighten the cover and blackbox together. It is possible but not recommended to attach the cables after the cover is attached. If you decide to install cables after, be careful doing it this way. The plug will be at a slight angle and could possibly break a connection pin if you are too rough or already have weak pins.