600pcs Tile Leveling System Kit Reusable Tile Spacer Wall Floor Clips Tool US
Ship within 24 hours.
50 Tile Spacers+ 50 Steel Pins+ 1 Wrench
Feature：
-Avoiding movements:Professional tool makes sure flatness between tiles during the mortar setting.
-Good quality :Made of high quality plastic and stainless steel which is wear-resistant and better hardness than 304 steel.
-Reusable & Money-saving
-Widely use :For Building ,Walls and Floors.
-Easily installed：1.Lay the first piece of brick, seam ≥2mm or above, and close to second bricks, Insert the T-pin along the crack.
2.Insert the T-needle along the crack, then rotate it to 90 degrees.
3.Tighten the adjusting cover so that the two bricks are in the same level.
4.Wait about 4-5 hours after leveling.
5.Before the cement or tile glue has completely dried up(usually no more than 6 hours), tighten the adjusting cover in the opposite direction, then rotate the T-pin 90 degrees so that the T-pin turns to a zigzag parallel to the tile.
6.Remove the leveler, clean and dry storage for reuse.
Specification：
Size:orange Spacers :2.8*7.8cm/1.1”*3.07”, black bottom:3.7*2.3cm/1.46”*0.9”
Steel Pins:1*0.15cm/0.39”*0.059”
Special Wrenches:15.5*3.4cm/6.1”*1.34”
Color: black and orange
Package included：
50/100/150/200/250/500pcs *Tile Spacers
50/100/150/200/250/500 pcs *Steel Pins
1/2/3/4/5/10 *Special Wrenches
100% New & Excellent Quality
Strictly QC, Each item was fully checked before shipping
Strictly QC, Each item was fully checked before shipping
FREE & FAST Shipping delivery with Tracking Number
50 Tile Spacers+ 50 Steel Pins+ 1 Wrench
Feature：
-Avoiding movements:Professional tool makes sure flatness between tiles during the mortar setting.
-Good quality :Made of high quality plastic and stainless steel which is wear-resistant and better hardness than 304 steel.
-Reusable & Money-saving
-Widely use :For Building ,Walls and Floors.
-Easily installed：1.Lay the first piece of brick, seam ≥2mm or above, and close to second bricks, Insert the T-pin along the crack.
2.Insert the T-needle along the crack, then rotate it to 90 degrees.
3.Tighten the adjusting cover so that the two bricks are in the same level.
4.Wait about 4-5 hours after leveling.
5.Before the cement or tile glue has completely dried up(usually no more than 6 hours), tighten the adjusting cover in the opposite direction, then rotate the T-pin 90 degrees so that the T-pin turns to a zigzag parallel to the tile.
6.Remove the leveler, clean and dry storage for reuse.
Specification：
Size:orange Spacers :2.8*7.8cm/1.1”*3.07”, black bottom:3.7*2.3cm/1.46”*0.9”
Steel Pins:1*0.15cm/0.39”*0.059”
Special Wrenches:15.5*3.4cm/6.1”*1.34”
Color: black and orange
Package included：
50/100/150/200/250/500pcs *Tile Spacers
50/100/150/200/250/500 pcs *Steel Pins
1/2/3/4/5/10 *Special Wrenches
400 Clips + 200 Wedges
USAGE:
Put the clip under two tiles
Press the wedge, until two tiles are at a same level
After 24hour, kick off the clips with foot or rubber hammer
Specification:
Clip: 40*26 mm
Wedge: 58*8.5*9.5 mm
Item color: as picture shown
Press the wedge, until two tiles are at a same level
After 24hour, kick off the clips with foot or rubber hammer
Specification:
Clip: 40*26 mm
Wedge: 58*8.5*9.5 mm
Item color: as picture shown
Package Includes:
400 Clips + 200 Wedges
Tile Leveling Pliers
Features：
* For ceramic tile, stone construction shop floor and walls when leveling and seam tool.
* With this tool, the leveling operation becomes easier and more convenient.
* Insert after use clean, ensure smooth during repeated use.
* Adjust the clamp for commonly used iron tools, please use in dry environment to prevent rust.
Specification:
Material: PP composite steel
Apply in: 3MM-28MM Ceramic Tile
Item color: Yellow
Package Includes:
1 x Ceramic Tile Leveling Tool
* For ceramic tile, stone construction shop floor and walls when leveling and seam tool.
* With this tool, the leveling operation becomes easier and more convenient.
* Insert after use clean, ensure smooth during repeated use.
* Adjust the clamp for commonly used iron tools, please use in dry environment to prevent rust.
Specification:
Material: PP composite steel
Apply in: 3MM-28MM Ceramic Tile
Item color: Yellow
Package Includes:
1 x Ceramic Tile Leveling Tool
50 Steel Pins Only
Feature:
1. Wear-resistant, recyclable, and can improve the installation speed of tiles.
2. Reduces the need for grinding and polishing, prevents tile from moving during solidification.
3. Easy to carry and easy to use in DIY operations, reducing the need for grinding and polishing and the fatigue and stress of installers.
Specification:
Color: Silver
Material: Manganese steel
Steel needle length: 32mm/1.26 inches
Steel needle thickness: About 2mm
Pieces: 50
Weight: 45g
Use tips:
1. Insert the steel needle into the gap of the tile, twist the leveling machine handle to rotate 90 degrees.
2. Tighten and rotate the nut to the right, adjust the height between the tiles, use a wrench for reinforcement.
3. After leveling, about 5-6 hours, before the cement and adhesive are completely dry, reverse the rotation of the leveler and take out the steel needle.
Package include:
50pcs×steel needle
1. Wear-resistant, recyclable, and can improve the installation speed of tiles.
2. Reduces the need for grinding and polishing, prevents tile from moving during solidification.
3. Easy to carry and easy to use in DIY operations, reducing the need for grinding and polishing and the fatigue and stress of installers.
Specification:
Color: Silver
Material: Manganese steel
Steel needle length: 32mm/1.26 inches
Steel needle thickness: About 2mm
Pieces: 50
Weight: 45g
Use tips:
1. Insert the steel needle into the gap of the tile, twist the leveling machine handle to rotate 90 degrees.
2. Tighten and rotate the nut to the right, adjust the height between the tiles, use a wrench for reinforcement.
3. After leveling, about 5-6 hours, before the cement and adhesive are completely dry, reverse the rotation of the leveler and take out the steel needle.
Package include:
50pcs×steel needle
