Superseded Part Number:
Fuel Filter: Replacement For 22937279,23456595,23304096,TP1015,TP1003,PU9005Z,CS11999,WF10453.
Air Filter: Replacement For A3231C,84262965,CA12258,33-5065,LAF3231,A41474,WA10695.
Fuel filter: This filter is located in the fuel line of your vehicle and help prevent fuel particles, such as dirt and rust, from entering the fuel delivery system to help keep the engine running properly.
Air filter: It traps airborne particles before they enter the engine and supplies the cleanest possible air with the least airflow restriction to the engine.
Package includes: 1* TP1015 Fuel Filter, and 1* A3231C Air Filter.
Compatible with
For 2017-2019 Chevy Silverado 2500HD 6.6L V8
For 2017-2019 Chevy Silverado 3500HD 6.6L V8
For 2017-2019 GMC Sierra 2500HD 6.6L V8
For 2017-2019 GMC Sierra 3500HD 6.6L V8
For 3.0L L5P Duramax
For 2021-2022 Escalade 3.0L
For 2021-2022 Escalade ESV 3.0L
For Chevy 3.0L / 6.6L L5P Duramax
For 2014-2015 Cruze 2.0L;
For 2017-2019 Cruze 1.6L
For 2020-2022 Silverado 1500 3.0L;
For 2022 Silverado 1500 LTD 3.0L
For 2017-2022 Silverado 2500/ HD3500 HD 6.6L
For 2021 Silverado 4500 HD/ 5500 HD/ 6500 HD 6.6L
For 2021-2022 Suburban /Tahoe 3.0L
For GMC 3.0L / 6.6L L5P Duramax
For 2020-2022 Sierra 1500 3.0L
For 2022 Sierra 1500 Limited 3.0L
For 2017-2022 Sierra 2500 HD 6.6L
For 2017-2022 Sierra 3500 HD 6.6L
For 2021-2022 Yukon/Yukon XL 3.0L
Function
It traps airborne particles before they enter the engine and supplies the cleanest possible air with the least airflow restriction to the engine.Keeps dust and debris out of your motor.Without a clean engine air filter in place, your vehicle's engine could suffer damage or decrease in efficiency as dirt particles impede complete combustion.
Installation
1.Put a pot under the fuel filter housing,use a 1-7/16” socket wrench to leak some fuel.
2.Unscrew the cap with the old filter,and put them into the pot.
3.Clean the fuel filter housing cap,change the provided 2 O-rings,and change the filter.
4.Screw the combination of the new filter and cap onto the housing with the wrench.
5.Cycle the key to activate the electronic fuel pump in the tank(To prime the system,no need to bleed).Then start it and check for leaks.
6.Reset the fuel filter indicator,press and hold the “select” button until you get a beep,cycle the key,then done.