Welcome to my store

This item will be shipped from Germany by DHL or UPS to European Union Customers.

Attention：

Please check the wiring video carefully before use

All goods price include  VAT.I will make invoice for every order.

If you have VAT number,don't forget give me your VAT number and company name after payment.

If you don’t have VAT number,you buy it directly,I will make invoice by your ebay address.


This item includes:
1pc  AC Servo Motor 1000w 2500rpm 4nm 191mm 17/23-Bit Encoder optical encoder2500line 
1pc  1000W AC Servo Motor Driver  A3A-L20A-R4ABF
1pc  3M Servo Encoder Extension Cable(Optical Encoder)
1pc  3M Servo Motor Extension Cable(Optical Encoder)
1pc  1,5M Servo Host Control Cable(Optical Encoder)

Features:


z Product introduction

A3A series digital AC servo drives are general-purpose AC servo drive
products with domestic leading level. This series of products adopts advanced full
digital control and AC motor vector control theory, with excellent system performance
and high reliability, and is widely used in servo shaft drive of food processing,
packaging machinery, textile machinery and other related automation industrial
machinery.

z Product features

A3A series fully sealed design, good protection and strong anti-interference ability
The compact design of A3A series saves installation space
Integrate speed control, position control and torque control
Can drive various types of permanent magnet synchronous servo motors
Excellent low-speed torque characteristics and industry-leading dynamic
acceleration and deceleration performance

 
Detailed information

1.AC Servo Motor 

Artikelbeschreibung  Item Description       ACT080-S100A04025G1N(ACT080-S100A001)

Teilenummer des Herstellers

Manufacturer Part Number

ACT080-S100A04025G1N(ACT080-S100A001)

Nennleistung( W )

Rated Power( W )

1000

Nennspannung (VAC)

Rated Voltage(VAC)

220

Nennstrome(A)

Rated Current(A)

4.4

Nenndrehzahl（RPM)

Rated Speed（RPM)

2500±10%

Spannung(N.M)

Rated Torque(N.M)

4

Spitzendrehmoment(N.M)

Peak Torque(N.M)

12

Spitzenstrom(A)

Peak Current(A)

13.2

Gegen-EMK Konstante（V/kPRPM)

Back emf Constant（V/kPRPM)

56

Drehmoment-Konst（N.M/A)

Torque Const（N.M/A)

0.9

Rotorträgheitsmoment (kg*m2*10-4)

Rotor Inertia（kg*㎡*10-4）

2.97

Widerstand ( Ω )

Resistance( Ω )

1.83ohm±10%

Induktanz(mH)

Inductance (mH)

4.72mH±20%(1KHz，1Vrms)

Elektrische Zeitkonstante（MS）

Electrical Time-Constant（MS）

2.58

Gewicht (kg)

Weight（Kg）

4.1

Isolationsklasse

Insulation Class

Class F

IP-Bewertung

IP Rating

IP65

Rahmengröße (mm)

Frame Size（mm）

80*80

Körper Länge (mm)

Body Length（mm）

191

Länge der Welle (mm)

Shaft Length（mm）

35

Wellendurchmesser (mm)

Shaft Diameter（mm）

19

Schlüssel Länge (mm)

Key Length（mm）

25

Leitungsverbindung

Wires Connection

EN: 1(U)-Red，2（V)-Yellow,3(W)-Blue,4(PE)-GEN 

DE: 1(U)-Rot,2(V)-Gelb,3(W)-Blau,4(PE)-GEN



2.AC Servo Motor Driver


Model

A3A-L20A 

Input
power
suppl

Main power
supply

Single phase/Three phase 220VAC -15%+10%
50/60Hz

Environ ment

Temperature

Work：0℃～ 40℃ Storage：-40℃～ 50℃

Humidity

Work：40% ～ 80%( no condensation) Storage：93% or less (no condensation)

Atmospheric pressure

86kPa ～ 106 kPaa

Protection grade

 

IP20

Control mode

position, speed, torque, position/speed, speed/torque, position/torque

Digital input

6 programmable input terminals(optical isolation)

Digital output

4 programmable output terminals(optical isolation)

Encoder
signal
output

Signal types

A, B, Z differential output, Z signal open collector output

Location

Input
frequency

Differential input: ≤500kHz (kpps); Single-ended input: ≤200kHz (kpps)

Command
mode

Pulse + Direction; Forward/Reverse Pulse; Quadrature Pulse

Electronic
gear ratio

1～32767/1 ～ 32767

Speed

Simulation
command
enter

±10VDC, input impedance 10kΩ

Instruction
plus
slow down

Parameter settings P-060/P-061

Command
source

Analog, internalspeed command

Torque

Monitoring
function

 -10V ~ +10V, input impedance 10kΩ

Torque limit

Parameter setting P-065/P-066

Command
source

Analog, internal torque command

Monitoring functions

Speed, current position, position deviation, motor torque, motor current, command
pulse frequency, etc.

Protection function

Overspeed, overvoltage, overcurrent, overload, abnormal braking, abnormal encoder,
position out of tolerance, command overclocking, etc.

Features

Speed
Bandwidth

≥800Hz

speed
volatility

＜±0.03% (load 0～100%); ＜±0.02% (power -15%～+10%)


Additional instructions：

1.About VAT invoice:Usually I will make invoice every Day,then I will send invoice to your ebay e-mail.Or we send the invoice is issued with the goods.

 If you don’t receive invoice,you contact me by ebay message.

2.Delivery time:All products are available and can be shipped out right after payment.

I only make ship on work day（Except Saturday、Sunday and Holiday）.

- Shipping via DHL or UPS.

After delivery,Please wait patiently.

If you not receive goods for a long time,you search the tracking on DHL or UPS website.If the tracking has problem,you make a call to your local DHL or UPS,then contact me .

3.Service: If you need more pictures, descriptions, manual, please contact me.

If you have problem,when you connect it,you contact me,I will help you.

Application:Our Stepper Motors are used on small to mid-sized CNC mills or milling machines, CNC lathes, Pick-n-place machines,Laser Engravers and Laser Cutters, Vinyl Sign Cutters, CNC Plasma Cutters, and CNC Foam Cutters. Carver machine ,Dispenser,Automazation,3D Printer,Stage lighting,instrument,laser equipment,scanner Dispenser,Logistics equipment,and so on.These motors have been used in precision telescope positioning systems and robots.