Please carefully review the wiring video before use!!!

This offer includes/Dieses Angebot beinhaltet：：

• 1 PC Servo Motor ACT110-S150A001

  1 PC Servo Motor Driver A3A-L30A-WABF

  1 PC  3M Servo Encoder Extension Cable(Optical Encoder)

  1 PC 3M Servo Motor Extension Cable(Optical Encoder)

  1 PC 1,5M Servo Host Control Cable(Optical Encoder)

   

  Einzelheiten/Details：ACT110-S150A001

   

  Angelegte Spannung	Applied voltage	220VAC
  Nennleistung	Rated Power	1500W
  Nennstrom	Rated Current	6A
  Nenndrehmoment	Rated Torque	5N.m
  Spitzendrehmoment	Peak Torque	15N.m
  Nenngeschwindigkeit	Rated Speed	3000RPM
  Massenträgheit des Rotors	Rotor Inertia	0,63×10-3KG.M²
  Widerstand pro Phase	Resistance	1,03 ohm±10%     AT20℃
  Induktanz pro Phase	Inductance	3,43mH±20%     AT1kHz,1Vrms
  Motorlänge	Motor Length	204mm
  Isolationsklasse	Insulation Class	Class F
  Sicherheitsklasse	Safety Class	IP65
  Umwelt	Environment	Temperature:-20℃-+40℃ Humidity Below 90% RH NO Dewing

   

  Einzelheiten/Details：A3A-L30A-WABF

   

  The installation environment of the servo drive has a direct impact on the normal

  function of the drive and its service life, so the installation environment of the drive

  must meet the following conditions:

  z Working environment temperature: 0℃～40℃; working environment humidity:

  below 40%～80% (no condensation).

  z Storage environment temperature: -40℃～50℃; Storage environment humidity:

  below 93% (no condensation).

  z Vibration: below 0.5G.

  z Prevent rain dripping or wet environment.

  z Avoid direct sunlight.

  z Prevent oil mist and salt corrosion.

  z Prevent corrosive liquid and gas erosion.

  z Prevent the intrusion of dust, cotton wool and metal fines.

  z Keep away from radioactive materials and combustibles.

  z When several drives are installed in the control cabinet, please pay attention to keep

  enough space for placement, which is conducive to air flow and heat dissipation.

  Please add a cooling fan to reduce the temperature around the servo drive. The

  long-term safe working temperature is below 40℃.

  z When there is a vibration source nearby (such as a punch press), if it is unavoidable,

  please use a vibration absorber or install an anti-vibration rubber gasket.

  z When there are interfering devices nearby, it may interfere with the power line and

  control line of the servo drive, which may cause the drive to malfunction. Noise

  filters and other various anti-interference measures can be added to ensure the

  normal operation of the driver. However, the noise filter will increase the leakage

  current, so it is necessary to install an isolation transformer at the power input end

  of the driver.