The station can monitor intercom activity on one or both channels with individual Listen Level controls via headset or external earphone or speaker. A mic preamp with limiter and proprietary speech-shaping circuits is included for enhanced intelligibility. Individual electronic momentary/latching talk buttons are provided for each channel, these buttons light dimly when latched.

The CS702 provides individual Call buttons for each channel to signal all stations on the channel(s). When a remote station operator sends a Call signal, the CS-702’s associated Talk button lights brightly, attracting the attention of operators who have removed their headsets or turned off their speakers. Pressing the RMK button will turn off the microphone talk circuits of all Clear-Com beltpacks eliminating annoying noise from the open headset microphones. Sidetone control allows the operator to vary the level of his or her own voice as heard in the headset. The CS-702 provides individual sidetone adjustment for each channel.

A balanced, mic- or line-level program signal for monitoring in the headset and/or mixing the intercom audio is available on one or both channels. The front panel provides a local Program Monitor volume control and individual Program Send level controls, and also provides a Program Send on/off/interrupt switch for each channel. When interrupt is selected, program is interrupted when the Talk button is pressed.

The CS-702 provides visual indication of power supply conditions. In the event of a DC short circuit or current overload, the station’s electronic overload protection circuit will shut down the DC output to avoid damage. As soon as the fault condition is removed, the auto-reset circuitry will automatically restore system power – even under full load conditions. There is no need to disconnect stations to allow the power supply to reset.

Features

Specifications