If the item is not suitable or does not work after receiving it, please contact us immediately in-app, do not open a case, we will give you a satisfactory solution, thank you for your purchase, and wish you a good day!
Important Notice:
Bulb size guide for replacing vehicle bulbs is only for reference. May not be 100% accurate. We do not guarantee 100% accuracy. Sourced data may vary due to trim packages, manufacturer and aftermarket modifications.
To confirm, please remove the bulb you wish to replace from your vehicle and compare the socket and size to the bulbs listed on our site.
For additional information or further assistance, contact customer service.
Plug Type: H7 single beam
Power: 200W/set (100W/bulb)
Quantity(each bulb): 2pcs 3570 CSP chips
Luminous Flux: 20000LM/set (10000LM/bulb)
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure Ice Blue 8000K
IP67 rated water and dust seal, 360 degree beam angle
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Over 50000hrs lifetime
Usage: High Beam or Low Beam or fog light
Package Included :
2x H7 Light Bulbs
(New and old packaging will be shipped randomly)
Power: 200W/set (100W/bulb)
Quantity(each bulb): 2pcs 3570 CSP chips
Luminous Flux: 20000LM/set (10000LM/bulb)
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure Ice Blue 8000K
IP67 rated water and dust seal, 360 degree beam angle
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Over 50000hrs lifetime
Usage: High Beam or Low Beam or fog light
Package Included :
2x H7 Light Bulbs
(New and old packaging will be shipped randomly)
headlight advantages:
đź’ˇ lamps are more energy and power than conventional halogen lamps.
The brightness is close to the xenon lamp, but the lights are illuminated without delay to enhance road safety.
Instantly start without strong current impact, improve battery life by more than 30%.
đź’ˇ Fast cooling , using the most advanced, heat-dissipating structural design.
Low warranty:
đź’ˇheadlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate!
đź’ˇheadlight color temperature are balancing. Xenon bulbs are clear in the same color, about 8000K.
đź’ˇ lamps are more energy and power than conventional halogen lamps.
The brightness is close to the xenon lamp, but the lights are illuminated without delay to enhance road safety.
Instantly start without strong current impact, improve battery life by more than 30%.
đź’ˇ Fast cooling , using the most advanced, heat-dissipating structural design.
Low warranty:
đź’ˇheadlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate!
đź’ˇheadlight color temperature are balancing. Xenon bulbs are clear in the same color, about 8000K.
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
On Jan 16, 2025 at 22:41:49 PST, seller added the following information: