*Body only *
(Charger, battery pack and case sold separately)
< Set contents >
・EZ 47 A1 X-B (Body)
・EZ9SXMJ3 (100 mm metalwork blade)
・EZ 47 A1F 7001 (hex wrench opposite side 3 mm)
< Product Features >
・4-position folding type for comfortable cutting work in narrow areas
・Smaller and lighter for easier work
・The blade can be replaced with a single touch. LED included for convenient use in the dark
4-position foldable to solve site problems
■At the time of removal and renewal of existing pipes
-- > Even if it is narrow, it can be folded and does not get in the way.
■When the crease of the ceiling board is opened
-- > It can be stretched so that it can be opened smoothly to the edge.
■When cutting PVC pipe under floor
-- > Since it can be stretched, you can work in a stable position even if it is narrow.
Easy handling even in narrow places.
●Unfolded: 455 mm
●Maximum fold: 345 mm
●Handle lock/unlock one-touch
●Protective shoe is movable
●With Spicon
●Handle Angle 4 Position
The effective length of the blade can be adjusted because the protect shoe moves back and forth.
Effective use of unused parts of the blade and prevention of base material cutting
The angle of the protect shoe can be adjusted to allow stable cutting.
Smaller and lighter for easier work
Sparks are hard to come out, so you don't have to worry.
Changing the blade is toolless and one-touch.
LED included for convenient use in the dark
Active in various cutting and opening
・For the removal of conduits
・For light sky cutting in high places
・For cutting PVC pipes on site
・In the gypsum board opening in the ceiling
・In the companion opening for wiring
・In the care of garden trees
Can be used for mulching and is resistant to water and dust
< < Dual, which can be used at either 14.4 V or 18 V > > >
1 unit can handle 14.4 V or 18 V just by changing the battery
・You can also use your own 14.4 V or 18 V batteries.
・The included battery can also be used with 18 V and 14.4 V dedicated tools.
< < Dust and dustproof, rain and splash resistant > >
Excellent dust- and water-resistant design. International Standard (applicable to IEC 60529)
Passed IP 56 exam
*required for IP5 protection grades as specified in international standards (applicable to IEC 60529)
The test was conducted by certification agency Intertek and passed.