Heatmiser UH8-RF
The Heatmiser UH8-RF is our 8 Zone wireless wiring centre designed to work with our Slimline-RF and neoAir Thermostats.
The UH8-RF provides central switching and is therefore ideally situated next to the underfloor heating manifold. 8 zones can be controlled as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. The boiler signal can also be sent via RF to the RF Switch, providing the installer a totally wireless solution.
Up to 6 actuators can be connected to each zone. An external aerial is available for use when the UH8-RF is being mounted in a metal cupboard or when the wireless signal is restricted.
A software option in the thermostat allows you to configure which zones are underfloor heating and which zones are radiators. Radiator zones will not enable the underfloor heating pump, valve and boiler when there is a call for heat. Radiator zones should enable the boiler from the end switch of the valve.
- Central wiring for up to 8 zones
- DIN Rail Mounting Option (DIN Rail not included)
- Output for underfloor heating valve and pump activated when any thermostat calls for heat
- Wireless Fail Safe Function
- Wireless Boiler Link (RF Switch Optional)
- Works with our Slimline-RF and neoAir)
- Output for multiple radiator zones
- Output for domestic hot water
- Actuator outputs: 230v
- Dimensions (LxHxD) 384x148x60mm
Heatmiser neoAir v3-M Wireless Smart Thermostat
The Heatmiser neoAir v3-M is our programmable wireless thermostat that is compatible with our RF Switch / UH8-RF and neoHub Mini Wireless Receivers.
Features:
- Battery Powered
- Heating Mode, Hot Water, Heating & Hot Water Mode
- Stunning design incorporating illuminated soft touch keys
- Remote Sensing Option
- User Selectable Operating Mode: 1) Non Programmable 2) Weekday/Weekend 3) All days different. 4) All days the same
- 5 Minute Program Intervals
- 0.5C Set Temp (eg 20.5C)
- Self Learning Optimum Start
- 4 Comfort Levels per Day
- Temperature Hold Facility
- Holiday Facility
- Automatic White Back Light (Turns off after 5 seconds)
- Flush Mounting
- C/F Selectable
- Key Code Facility
- Frost Protection
Important
Please note there is no receiver included with this product. If you require a receiver, please select one from the option available above.
The neoAir v3-M is compatible with the following hubs;
neoHub Mini OT - Select this hub if you have up to 2 heating zones and an OpenTherm compatible boiler.
neoHub Mini HW - Select this hub if you have up to 2 heating zones and a hot water cylinder.
neoHub - Select this hub if you have up to 32 heating/hot water zones.
Wireless Air Sensor & Door Contact Function - neoHub required
When paired to the neoHub, you can use the wireless air sensor to measure the temperate remotely from the neoStat or to take an average temperature in a larger room. You can also have the heating turn off whenever a window or door is opened with the use of the door contact switch.
HomeKit-Enabled neoHub (2nd generation)
Heatmiser neoHub is the gateway to the Neo System, providing remote control of all neoStat's and neoPlug's from your iOS or Android device.
The Heatmiser neoHub connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a FREE account via the Neo app and then take control of your heating, hot water and appliances from anywhere.
Key Features
- neoHub creates a Mesh Network to the powered Neo devices, greatly increasing the network range in your home.
- Smart Profiles - Allow you to program time and temperature settings and then apply them to a number of zones. Any subsequent change to the profile will be automatically applied to those zones using the profile.
- Geo Location: Automatically turn the heating off when you leave home and back on when you return.
- Compatible with up-to 32 Neo devices.
- Works with HomeKit, Google Home, Alexa, IFTTT.
- Automatic Firmware updates for neoHub and connected devices.
- Clock Sync and BST correction - UK/CET and NZ Time Zones.
Enhanced History shows detailed information for your system for last 4 weeks.
- The set temperature, indicated by the dotted line.
- When the heating is preheating (warming your home ready for the start of your heating program) Shown in green.
- When the heating is on, shown in red.
- You can select a particular day by using the calendar button or you can press the -1 day +1 day to quickly jump back a few days.
- Hours Run (the time the heating has been switched on) is shown for each day per zone.
Push Notifications
Push notifications are short messages that are sent directly to your phone based on a condition in your neoApp, such as high or low temperature, door open or low battery warning.
High/Low temperature Alert: When the temperature in your home reaches your high or low temperature limit you will receive a push notification on your device. This will inform you of the location and device that triggered the alert.
Window Open: If you have installed any Heatmiser Door/Window contact switches, you can select to receive a push notification whenever a door/window is opened. The push notification will re-trigger whenever the window or door is reopened. The notification will inform you of the location and device that triggered the alert.
Low Battery: If you have any neoAir, wireless sensors or window/door contact switches installed, you can select to receive a push notification whenever the device requires new batteries. The push notification will be sent every 48 hours until the low battery warning is cleared. This will inform you of the location and device that triggered the alert.
Compatibility
- Mobile apps: iOS 13+ iPhone/iPad | Android 8+ device
- Smart Home: HomeKit, Google Home, Alexa, IFTTT
- UK/EU Power Adaptor
- 1m Ethernet Cable
We offer FREE NEXT WORKING DAY shipping on all orders to mainland UK. (This excludes Northern Ireland, Channel Islands and Scottish Highlands, although delivery is possible. Please contact us for a price).
To qualify for next working day delivery service, orders must be placed by 1pm Monday to Friday.
Some products depending on the order quantity, require palletised delivery and therefore are subject to 2/3 days delivery timescale. We have stated this on the product listings individually.
We accept card payments via Paypal.
Please pay as soon as possible after confirming your order to enable us to post your goods as soon as possible.
Customer Satisfaction
If you are not 100% satisfied with your purchase, you can return the product within 30 days and get a full refund, or exchange the product. Items must be sent along with the printed order information. Any returns must be in the original packaging.
We must be notified of any damages, defects or shortages within 14 days of receiving your goods.
Heatmiser UH8-RF
The Heatmiser UH8-RF is our 8 Zone wireless wiring centre designed to work with our Slimline-RF and neoAir Thermostats.
The UH8-RF provides central switching and is therefore ideally situated next to the underfloor heating manifold. 8 zones can be controlled as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. The boiler signal can also be sent via RF to the RF Switch, providing the installer a totally wireless solution.
Up to 6 actuators can be connected to each zone. An external aerial is available for use when the UH8-RF is being mounted in a metal cupboard or when the wireless signal is restricted.
A software option in the thermostat allows you to configure which zones are underfloor heating and which zones are radiators. Radiator zones will not enable the underfloor heating pump, valve and boiler when there is a call for heat. Radiator zones should enable the boiler from the end switch of the valve.
- Central wiring for up to 8 zones
- DIN Rail Mounting Option (DIN Rail not included)
- Output for underfloor heating valve and pump activated when any thermostat calls for heat
- Wireless Fail Safe Function
- Wireless Boiler Link (RF Switch Optional)
- Works with our Slimline-RF and neoAir)
- Output for multiple radiator zones
- Output for domestic hot water
- Actuator outputs: 230v
- Dimensions (LxHxD) 384x148x60mm
Heatmiser neoAir v2-M Wireless Smart Thermostat
The Heatmiser neoAir v2-M is our programmable wireless thermostat that is compatible with our RF Switch / UH8-RF and neoHub Mini Wireless Receivers.
Features:
- Battery Powered
- Heating Mode, Hot Water, Heating & Hot Water Mode
- Stunning design incorporating illuminated soft touch keys
- Remote Sensing Option
- User Selectable Operating Mode: 1) Non Programmable 2) Weekday/Weekend 3) All days different. 4) All days the same
- 5 Minute Program Intervals
- 0.5C Set Temp (eg 20.5C)
- Self Learning Optimum Start
- 4 Comfort Levels per Day
- Temperature Hold Facility
- Holiday Facility
- Automatic White Back Light (Turns off after 5 seconds)
- Flush Mounting
- C/F Selectable
- Key Code Facility
- Frost Protection
Important
Please note there is no receiver included with this product. If you require a receiver, please select one from the option available above.
The neoAir V2-M is compatible with the following hubs;
neoHub Mini OT - Select this hub if you have up to 2 heating zones and an OpenTherm compatible boiler.
neoHub Mini HW - Select this hub if you have up to 2 heating zones and a hot water cylinder.
neoHub - Select this hub if you have up to 32 heating/hot water zones.
Wireless Air Sensor & Door Contact Function - neoHub required
When paired to the neoHub, you can use the wireless air sensor to measure the temperate remotely from the neoStat or to take an average temperature in a larger room. You can also have the heating turn off whenever a window or door is opened with the use of the door contact switch.
HomeKit-Enabled neoHub (2nd generation)
Heatmiser neoHub is the gateway to the Neo System, providing remote control of all neoStat's and neoPlug's from your iOS or Android device.
The Heatmiser neoHub connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a FREE account via the Neo app and then take control of your heating, hot water and appliances from anywhere.
Key Features
- neoHub creates a Mesh Network to the powered Neo devices, greatly increasing the network range in your home.
- Smart Profiles - Allow you to program time and temperature settings and then apply them to a number of zones. Any subsequent change to the profile will be automatically applied to those zones using the profile.
- Geo Location: Automatically turn the heating off when you leave home and back on when you return.
- Compatible with up-to 32 Neo devices.
- Works with HomeKit, Google Home, Alexa, IFTTT.
- Automatic Firmware updates for neoHub and connected devices.
- Clock Sync and BST correction - UK/CET and NZ Time Zones.
Enhanced History shows detailed information for your system for last 4 weeks.
- The set temperature, indicated by the dotted line.
- When the heating is preheating (warming your home ready for the start of your heating program) Shown in green.
- When the heating is on, shown in red.
- You can select a particular day by using the calendar button or you can press the -1 day +1 day to quickly jump back a few days.
- Hours Run (the time the heating has been switched on) is shown for each day per zone.
Push Notifications
Push notifications are short messages that are sent directly to your phone based on a condition in your neoApp, such as high or low temperature, door open or low battery warning.
High/Low temperature Alert: When the temperature in your home reaches your high or low temperature limit you will receive a push notification on your device. This will inform you of the location and device that triggered the alert.
Window Open: If you have installed any Heatmiser Door/Window contact switches, you can select to receive a push notification whenever a door/window is opened. The push notification will re-trigger whenever the window or door is reopened. The notification will inform you of the location and device that triggered the alert.
Low Battery: If you have any neoAir, wireless sensors or window/door contact switches installed, you can select to receive a push notification whenever the device requires new batteries. The push notification will be sent every 48 hours until the low battery warning is cleared. This will inform you of the location and device that triggered the alert.
Compatibility
- Mobile apps: iOS 13+ iPhone/iPad | Android 8+ device
- Smart Home: HomeKit, Google Home, Alexa, IFTTT
- UK/EU Power Adaptor
- 1m Ethernet Cable
We now have a warehouse in Bermondsey, London SE16, where we have many of our products in stock.
All you have to do, is place your order via eBay, send us a message that you would like to collect the goods, and we will have it ready within an hour for you to pick up.
Our full address is;
Underfloor Heating Express,
Unit 19 Enterprise Industrial Estate, Bolina Road,
London, SE16 3LF
We are situated outside the Congestion and ULEZ charges
We offer FREE NEXT WORKING DAY shipping on all orders to mainland UK. (This excludes Northern Ireland, Channel Islands and Scottish Highlands, although delivery is possible. Please contact us for a price).
To qualify for next working day delivery service, orders must be placed by 1pm Monday to Friday.
Some products depending on the order quantity, require palletised delivery and therefore are subject to 2/3 days delivery timescale. We have stated this on the product listings individually.
We accept card payments via Paypal.
Please pay as soon as possible after confirming your order to enable us to post your goods as soon as possible.
Customer Satisfaction
If you are not 100% satisfied with your purchase, you can return the product within 30 days and get a full refund, or exchange the product. Items must be sent along with the printed order information. Any returns must be in the original packaging.
We must be notified of any damages, defects or shortages within 14 days of receiving your goods.