eBay

√ The LED has high luminous purity, no need for lampshade filtering, and the light wavelength error is within 5 nanometers

√ There is no delay when the LED lights up, while the traditional tungsten bulb has a delay of 0.3 seconds.

√ LED has low power consumption. When it reaches the same brightness of traditional bulbs, it consumes only 6% of traditional bulbs, and it also saves electricity and fuel!

√ It has a long life, its filament-free structure does not generate heat, and it can be used for more than 6 years under normal conditions

√ LED car lights can make the vehicle control circuit not easy to oxidize, with a maximum load current of 0.1A.

Specification：

Features: Small size, Easy installation, Super Bright, Two Way Heat Dissipation
Light Source: 2pcs Custom COB Chips
Color Temperature: 6000K
Working Voltage: 10V-30V
Wattage: 32W
Luminous Flux: 5500LM
Cooling System: High speed mute fan, Aluminum Radiator
Material: Aluminum-magnesium alloy
Life Span: >30000 hours
Working Temperature:-30°C~+110°C
Driver: Built-in Driver, Plug and Play
Certification:CE,ROHS,FCC

Package Included:

2 x LED Headlight Bulb
2 x LED Fog Light Bulb

LED headlight advantages:

****LED lamps are more energy and power than conventional halogen lamps.

****The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety.

****Instantly start without strong current impact, improve battery life by more than 30%.

****Fast cooling , using the most advanced, heat-dissipating structural design.

****The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%.

****Low heating temperature, The working temperature of helium can reach 800°-1000°

****LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate!

****Car LED headlight color temperature are balancing. Xenon bulbs are clear in the same color, about 6000K-6500K.

Install Caution:

1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.

2. Put the vehicle into park or make sure it is securely in gear.

3. Be sure to turn off the ignition and remove the key.

4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.

5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.

6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.

7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.