Welcome to the new - DTF technology, Thermoplastic Polyurethane Powder

We offer a DTF Transfers printing service.

IF YOU REQUIRE BIGGER SIZES TRANFERS PLEASE SEE MY OTHER LIST.

- any colour garment with no extra cost per colour

- virtually any fabric type that can be adequately pressed

All you need is some artwork and a professional heat press to get your product or brand on the market!

Household irons and the Circuit may not work as they cannot provide adequate pressure.

Recommended pressing times

Cotton material -

Medium pressure 145c for 15 sec, Hot Peel, Re-press for 5 sec.

Polyester material -

Medium Pressure 140C for 8-10 sec, Hot Peel, Re-press for 5 sec.

Always use parchment paper.

Images should ideally be vectored for best quality. EPS, PNG OR PDF is fine the Recommended 300 DPI and no lower then 72 DPI.

- For PNG, resolution 72 DPI or above recommended and please remove the background.

We wont do any work on images sent, make sure you send the image or images without background and inside the printing area.

If you need any other information please don’t hesitate to contact us.

Can be used on 100% cotton, 100% polyester, cotton/poly blends, triblends, mesh, canvas, Lycra®, spandex, elastane, Jeans, Leather and more.

RETURNS NOT ACCEPTED